La Crosse Technology WS-9032U - Manual

La Crosse Technology WS-9032U – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – TABLE OF CONTENTS; Topic; INVENTORY OF CONTENTS; remote thermo/hygro sensor; first then into the in-; DETAILED SET-UP GUIDE; I. Battery Installation; Battery Cover; Rain Cover
Page 3 – ride any time and date set to the time zone selected.; III. Explanation of LCD Information; A. The below picture highlights the LCD features.; tion of your indoor weather station; A. Overview of programming mode sequence; Relative pressure setting; B. LCD Contrast Setting; tinue to the Time Zone setting; G. Setting The Hour Manually; Moon Phase Display
Page 4 – FEATURES AND OPERATIONS
Page 5 – MOUNTING; Pressure trend arrow
Page 7 – WARRANTY INFORMATION
Page 8 – La Crosse Technology, Ltd

Loading the manual

WS-9032U

Wireless 433 MHz

Weather Station

Instruction Manual

Contents

Language

Page

English

French

Spanish

FCC ID: OMO-01RX (Receiver), OMO-01TX (transmitter)

FCC DISCLAIMER

This device complies with par t 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that

may cause undesired operation.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - TABLE OF CONTENTS; Topic; INVENTORY OF CONTENTS; remote thermo/hygro sensor; first then into the in-; DETAILED SET-UP GUIDE; I. Battery Installation; Battery Cover; Rain Cover

TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 3 About WWVB 3 Quick Set Up Guide 4 Detailed Set Up Guide Battery Installation 4 Start Up Sequence 6 Explanation of LCD Information 7 Function Key Layout 8 Program Mode Overview of Programming Sequence 8 LCD Contrast Setting 8 ...

Page 3 - ride any time and date set to the time zone selected.; III. Explanation of LCD Information; A. The below picture highlights the LCD features.; tion of your indoor weather station; A. Overview of programming mode sequence; Relative pressure setting; B. LCD Contrast Setting; tinue to the Time Zone setting; G. Setting The Hour Manually; Moon Phase Display

3. Do not press any buttons for at least ten minutes. If a button is pressed before the indoor weather station has received information from the TX4U sensor, no datawill be received from that sensor until reset. 4. Replace the battery cover. II. Start Up SequenceA. Initial Start 1. Immediately after...

Page 4 - FEATURES AND OPERATIONS

GB P.10 GB P.11 1. Press and hold the “SET” button for five seconds.2. “lcd” will appear at the top of the display and a number will flash next to it.3. Press and release the “SET” button five more times to advance to the Manual Hour setting. 4. The hour will begin to flash at the top of the display...