La Crosse Technology WS-8157 - Manual
La Crosse Technology WS-8157 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – “SET”; FUNCTION KEYS
- Page 3 – Weather Icons; Sunny; Weather Tendency Arrows; Setting up”; TIME ZONE SETTING
- Page 6 – temperature/outdoor temperature; WWVB RADIO CONTROLLED TIME; Manual time setting; POSITIONING; FOLDOUT TABLE STAND
- Page 9 – WARRANTY INFORMATION; For warranty work, technical support, or information contact:; THAT MAY CAUSE UNDESIRED OPERATION.
Holder
WS-8157
ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE
AND WEATHER FORECAST
Instruction Manual
FEATURES:
ATOMIC CLOCK:
•
WWVB Radio controlled time with manual time setting
•
12/24 hour time display
•
Time display: hour, minute, second
•
Alarm setting with snooze function
•
Calendar
display
•
Weekday display (4 languages to choose from: English, French, Spanish and German)
•
Time zone setting
•
Daylight savings time ON/OFF option (DST)
•
ºC or ºF temperature display selectable
•
Indoor temperature display
•
Outdoor temperature display via 433MHz transmission
•
Wall mount or freestanding
•
Weather forecast for next 12 to 20 hours based on changing air pressure
OUTDOOR TEMPERATURE TRANSMITTER:
•
Remote transmission of outdoor temperature to the atomic clock by 433 MHz signals
•
Wall mounting case
TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK
The atomic clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow the
steps below:
1.
Insert finger or other solid object in the space at the bottom center of the battery compartment
and lift up to remove the cover.
2.
Insert batteries observing the correct polarity (see marking inside battery compartment).
3.
Replace compartment cover.
DO NOT SET THE CLOCK.
TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the
steps below:
1.
Remove the cover.
2.
Insert the batteries, observing the correct polarity (see marking inside battery compartment).
3.
Replace the battery cover on the unit.
Alkaline batteries are recommended for use in both units. Avoid using rechargable batteries.
SETTING UP:
Function keys
LCD1
display
Foldable stand
Battery cover
Hanging holes
LCD2
display
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Weekday Alkaline batteries are recommended for use in both units. Avoid using rechargable batteries. NOTE: Do not set the clock until the outdoor temperature is displayed. 1. Place batteries in the outdoor transmitter first, then into the atomic clock. DO NOT PRESS ANY BUTTONS FOR 10 MINUTES. 2. Aft...
Weather Icons There are 3 possible weather icons that will be displayed in the LCD 2: Sunny —indicates that the weather is expected to improve (not that the weather will be sunny). Sun with Clouds —indicates that the weather is expected to be fair (not that the weather will be sunny with clouds). Cl...
1. Press the + key. The display should now show the month&date/weekday/seconds/outdoor temperature. 2. Press the + key a second time and the display will now show the month&date/weekday/indoor temperature/seconds. 3. Press the + key third time and the display will now show the month&date...
