La Crosse Technology WS-8010U - Manual
La Crosse Technology WS-8010U – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Topic Page; Detailed Set-Up Guide
- Page 4 – WEATHER CENTER; SET
- Page 5 – PROGRAM MODE; key; FUNCTION KEYS
- Page 8 – GRAPHIC TIME DISPLAY OPTIONS
- Page 10 – WEATHER ICONS; Sunny
- Page 11 – to be received is the “boxed #2,” and the 3; Remove the battery covers to all sensor units (new and old).
- Page 12 – SELECTING WHICH SENSOR DATA TO DISPLAY
- Page 15 – MOUNTING WITH THE SCREWS; Remove the mounting bracket/receptor from the packaging plastic.
- Page 18 – Temperature measuring range; Indoor Humidity checking interval:; Power Supply; Approximately 12 months.; WARRANTY INFORMATION
- Page 19 – La Crosse Technology
WS-8010U
Wireless 433 MHz
Giant Radio Controlled Weather Center
Instruction Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 3 Quick Set-up 3 Detailed Set-Up Guide Battery Installation 3-4 Program Mode Function Keys/Buttons 5 LCD Contrast Setting 6 Time Zone Setting 6 Daylight Saving Time Setting 6 Language Setting 6-7 12/24 hour Time Setting 7 Sel...
4 arrow, sliding the battery cover off. 3. Observing the correct polarity install 2 AA batteries. The batteries will fit tightly (avoid start-up problems—make sure they do not spring free). 4. Replace the battery cover, and place the rain cover snugly onto the sensor. B. WEATHER CENTER 1. Remove the...
5 PROGRAM MODE The Program Mode is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the Weather Center completely. Complete programming is usually done for the initial set-up, and will require you to skip step 1 of each ...