La Crosse Technology WS-7049U - Manual

Page 2 - TABLE OF CONTENTS; Topic Page

2 TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery Installation 5 Program Mode Function Keys 6 Time Setting 6 Features Weather Forecast 7-8 Indoor Temperature and Humidity 9 Outdoor Temperatures 9 Minimum & Maximum Recor...

Page 3 - Instruction manual and warranty card.; Figure 2; Figure 1

3 INVENTORY OF CONTENTS 1. The indoor weather station (Figure 1). 2. One TX6U remote temperature sensor with mounting bracket (Figure 2). 3. Three each, ½” Philips screws. 4. One strip double-sided adhesive tape. 5. Instruction manual and warranty card. ADDITIONAL EQUIPMENT (not included) 1. Two, fr...

Page 4 - remote temperature sensor; first then into

4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station and remote temperature sensor 3 to 5 apart. 2. Batteries should be out of both units for 10 minutes. 3. Place the batteries into the remote temperature sensor first the...

Page 5 - A. Remote Temperature Sensor; bracket snaps on and off easily.; B. Indoor Weather Station; Observe the correct polarity, and install

5 DETAILED SET-UP GUIDE Battery Installation A. Remote Temperature Sensor 1. Remove the mounting bracket. The bracket snaps on and off easily. 2. Remove the battery cover, by sliding the cover down. 3. Observing the correct polarity install 2 AA batteries. The batteries will fit tightly (to avoid st...

Page 6 - Program Mode; “CH”; Time Setting; “SET”

6 Program Mode Programming Note: If 30 seconds are allowed to pass or either the IN or the OUT button is pressed during programming modes, the unit will set the last information entered—the display will stop flashing and return to normal time-date readings A. Function Keys There are four function bu...

Page 7 - I. Weather Forecast

7 FEATURES OF THE WS-7049U I. Weather Forecast The weather forecasting feature is estimated to be 75% accurate for the next 12 to 24 hours. The weather forecast is based solely upon the change of air pressure over time. The WS-7049U averages past air-pressure readings to provide an accurate forecast...

Page 8 - Icons; Sunny; B. Weather Tendency Arrows; These arrows reflect current changes in the air pressure.

8 A. Weather Icons There are 3 possible weather icons that will be displayed in the FORECAST LCD: Sunny —indicates that the weather is expected to improve (not that the weather will be sunny). Sun with Clouds —indicates that the weather is expected to be fair (not that the weather will be sunny with...

Page 9 - Adding Remote Temperature Sensors; IV. Minimum and Maximum Temperature Records; Press and release the; B. Resetting the Minimum and Maximum Temperature

9 II. Indoor Temperature and Humidity The current indoor relative humidity (viewed below the time) and temperature (viewed below the relative humidity) are displayed in the INDOOR LCD. III. Outdoor Temperature The outdoor temperature is viewed in the OUTDOOR LCD. When there is more than one remote t...

Page 10 - A. Set Up of Multiple Remote Sensors

10 Press and hold the “MIN/MAX/RESET” button for 5 seconds to reset the minimum and maximum recorded temperatures. V. Adding Remote Sensors (optional) The WS-7049U is able to receive signals from 3 different remote temperature sensors. The remote temperature sensor model(s) that you choose will come...

Page 12 - I. THE REMOTE TEMPERATURE SENSOR; The remote temperature sensor can be mounted in two ways:; A. MOUNTING WITH SCREWS

12 MOUNTING Note: To achieve a true temperature reading, avoid mounting in direct sunlight. We recommend that you mount the remote temperature sensor on a North-facing wall. The sending range is 80ft; obstacles such as walls, concrete, and large metal objects will reduce the range. Also, extreme and...

Page 13 - The indoor temperature station can be mounted in two ways:; A. USING THE TABLE STAND

13 B. MOUNTING WITH ADHESIVE TAPE 1. With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting surface should be smooth and flat. 2. Remove the protective strip from one side of the tape. Adhere the tape to the designat...

Page 15 - MAINTENANCE AND CARE INSTRUCTIONS; Do not submerge in water.

15 MAINTENANCE AND CARE INSTRUCTIONS • Extreme temperatures, vibration and shock should be avoided to prevent damage to the units. • Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents. They may mark the displays and casings. • Do not submerge in water. • Immedia...

Page 17 - WARRANTY INFORMATION

17 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to th...

Page 18 - La Crosse Technology

18 PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH. This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitati...

La Crosse Technology WS-7049U - Manual

Table of Contents:

Summary

Other La Crosse Technology Models