La Crosse Technology 308-1410GR - Manual
La Crosse Technology 308-1410GR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Wireless Thermometer
Model: 308-1410GR | Instruction Manual
This W ireless Therm ometer features: indoor/outdoor temperature
with MIN/MAX readings in Fahrenheit or Celsius, outdoor
temperature trend arrow, and manual set time. W ireless
transmission range of over 200 feet (60 meters) in open air, from
transmitter to wireless therm ometer.
SETUP INSTRUCTIONS STEP BY STEP
STEP 1:
•
Remove battery cover from the W ireless
Therm ometer.
•
Insert 2 NEW AA batteries (not included) into
the bac k of the wireless thermom eter. Observe
the c orrect polarity (see m arking inside the
battery compartment).
•
The wireless thermom eter will light up and
show, indoor temperature, and time (12:00).
STEP 2:
•
Ensure that the transmitter is within 10 feet of the
wireless therm ometer.
•
Remove battery cover from TX141-B transmitter: Slide
the battery cover down and lift off the front.
•
Insert 2 NEW AA batteries into the transmitter.
Observe the c orrect polarity.
•
W ithin 3 minutes the W ireless Therm ometer will show
readings in the outdoor temperature area on the LCD.
Note
: Allow the wireless thermometer and the
transmitter to stay within 10 feet of each other for the first 15
minutes of set up.
•
Do Not Mix Old and New Batteries
•
Do Not Mix Alkaline, Standard, Lithium or Rechargeable
Batteries
TRANSMITTER SIGNAL STRENGTH INDICATOR
After the batteries are inserted, the wireless therm ometer will
search for the outdoor temperature transmitter for 3 minutes.
The antenna symbol
will flash during rec eption, and
temperature display will be dashes “---“.
No antenna symbol will show during transmitter synchronization.
If synchronization fails onc e, the antenna will lose one bar.
If synchronization fails twice, the antenna will lose tw o bars.
If RF (radio frequency) rec eption fails five times, the antenna
symbol will be shown as .
The antenna will show full display with successful RF
(radio frequency) rec eption.
TROUBLE SHOOTING
•
If the wireless thermometer does not display the outdoor
temperature after 3 minutes, remove the batteries from both units
and start the setup proc ess again.
•
If the outdoor temperature does not show up after a sec ond
attempt, please slide open the battery c over of the outdoor
transmitter to reveal the TX button. Push down on the TX button
for 3 sec onds to send a wireless signal to the wireless
thermom eter.
•
For optimal 433 MHz signal rec eption, the outdoor transmitter
should be plac ed within 200 feet (60 meters) from the wireless
thermom eter.
SET TIME
The SET/°F/°C button moves through the program menu. The
MIN/MAX/+ button changes the value.
•
12/24-HOUR TIME:
Hold the SET/°F/°C button for 2 sec onds.
12H will flash. Press and release the MIN/MAX/+ button to select
24-hour time format. Press and release the SET button onc e to
move to the hour.
•
HOUR
: The Hour will flash. Press and release the MIN/MAX/+
button until the c orrect hour is show n. Press and release the SET
button onc e to move to the minutes.
•
MINUTES:
The Minutes will flash. Press and release the
MIN/MAX/+ button until the c orrect minutes are displayed. Press
and release the SET button onc e more to exit the program menu.
FAHRENHEIT/CELSIUS
Press the SET/°F/°C button to
select Fahrenheit or Celsius
temperature readout.
MAXIMUM/MINIMUM TEMPERATURE READINGS
The W ireless Therm omet er will show the daily minimum and
maximum temperatures eac h day starting at midnight (12:00 AM).
The temperature station autom atically resets the min/max
temperatures at midnight (12:00 AM).
VIEW MINIMUM:
Press MAX/MIN button to show the minimum
temperature rec ord.
RESET MINIMUM
: W ith the minimum temperatures displayed,
press and hold the MAX/MIN key for 2 sec onds to manually clear the
MIN rec ords in mem ory.
VIEW MAXIMUM
: Press MAX/MIN key again, to show the
maximum temperature rec ords. In maximum memory display mode,
RESET MINIMUM:
W ith the maximum temperatures displayed,
press and hold the MAX/MIN key for 2 sec onds to manually clear the
MAX rec ords in memory.
TEMPERATURE TREND ICONS
The outdoor temperature trend indic ators will update every 30
minutes or less. These trends represent temperature changes over
the past three hours.
Temperature rising more than 2°F / 1°C in the past three
hours
Temperature has
not changed
more than 2°F / 1°C in the
past three hours.
Temperature falling more than 2°F / 1°C in the past three
hours
The temperature trend indic ators are shown next to the indoor
temperature and outdoor temperature readings.
POSITIONING THE TEMPERATURE TRANSMITTER
The rem ote temperature transmitter should be mounted vertically to
avoid dam age. Plac e both units in the desired loc ations, and wait
approxim ately 1-hour before permanently mounting the transmitter
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
