KTI Networks KS-801 - Manual
KTI Networks KS-801 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 5 – Table of Contents
- Page 10 – Installing the Switch; country of operation.
- Page 12 – Mounting the Switches; The switches can be placed on a desktop as a stand-alone unit. Allow
- Page 13 – Making Network Connections; Network Switched Ports; The switch comes with nine Fast Ethernet switched ports and Port #9; Standard
- Page 14 – 10/100BASE-TX Fast Ethernet Switched Ports; Crossover SW; Crossover SW
- Page 17 – Fast Ethernet Fiber Slot; available for selection:; Module; Switched port #9 supports two types of connections. One type is UTP
- Page 20 – Making Trunk Connections; composes one trunk. Two switch units can be cascaded through one; Configuration; Refer to the software operation manuals in the supplied CD-ROM for
- Page 24 – Performing Network Management; Management Support; by using the following methods:
- Page 25 – Management objects; Port Statistics
- Page 26 – Setting IP Address; admin; Console Management; Factory default settings of the Console port
- Page 27 – from a PC COM port. The pin assignments of the connection are:; Switch DTE console port; The console port does not support modem connection.; Telnet Management; Use Telnet software to perform the management operation. The most
-1-
Installation Guide
10/100 Fast Ethernet Managed
Switch with Fiber Connectivity
KS-801
DOC.001002-KS801-K
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
-5- Table of Contents 1. Introduction ......................................................... 6 1.1 Features ............................................................................... 71.2 Specifications ....................................................................... 9 2. Installing t...
-10- 2. Installing the Switch The switch is designed to operate in workgroup environments without a complicated configuration procedure. It also features an auto-select 100- 240V, 50/60Hz power supply unit, which works in most countries around the world. Before connecting the supplied power cord int...
-12- 2.3 Mounting the Switches The switches can be placed on a desktop as a stand-alone unit. Allow enough ventilation space between the switch and the objects around it. Desktop Mounting For mounting the switch into a 19-inch rack, a pair of mounting brackets is included in the pack. Install Rack M...
