Kompernass KH 6511 - Manual

- 7 - 6.3. Connecting to a television via video input (composite video) For this connection variant the television must be equipedwith Audio/Video cinch sockets (Composite Video).In order to connect the DVD player to a television viaComposite Video you will need• Audio/Video cinch cable • Connect th...

- 8 - 6.5. Connection via VGA This connection variant is only possible with very high gradetelevisions, LCD/Plasma screens or Video projectors For thisconnection variant the television must be equiped with aVGA input and two unoccupied audio cinch sockets. Checkwith the instruction manual of the cor...

- 11 - - DVD Subtitle: Here you set the language of the subtitlewhen the playback of a DVD is displayedon the television screen (only if the langu-age is present on the DVD). - Audio: Here you set the language, in which theDVD should be started. Films can thenonly be played back in the language that...

- 12 - - Digital Output: Here you set the digital output signal ofthe DVD player.OFF: No digital audio component is connected PCM: a two channel digital audio com- ponent is connected via coaxial cable or optical cable. RAW: a multi channel digital audio com- ponent i.e. DTS receiver is connec-ted v...

- 13 - 9. Initial operation of the DVD player After you have …• placed the DVD player in a suitable location• connected the DVD player to a television by one of the designated connection options • connected the DVD player, if desired, to a HiFi or Surround system (analogue/digital) for example a Dol...

- 14 - SmartMedia memory cards (SM) NOTE: Only SmartMedia memory cards of type 3.3 V can be used!SmartMedia memory cards of type 5 V cannot be used! You can easily distinguish SmartMedia memory cards by means of the following diagram: You must insert the SmartMedia memory cards (3,3V) into theupper ...

- 16 - Stop playbackTo stop playback of the film on the inserted DVD/VCD/S-VCDpress the button "Stop" on the front panel of the DVD player or on the remote control. ... with the Resume functionIf you have stopped playback of the inserted DVD/VCD/S-VCDby pressing the "Stop" button onc...

- 19 - To use the programmed play...• During playback or when playback is stopped press the "PRG" button on the remote control. The programme menu is displayed on the screen: • Use the control buttons on the remote control to select the desired title. • Confirm the selection by pressing the ...

- 20 - For VCDs/S-VCDs:• the time already played back of the currently running VCD/S-VCD in hours, minutes and seconds • the time left to the end of the film currently playing in hours, minutes and seconds • the type of inserted disc (VCD/S-VCD)• the current playback language setting • To hide the d...

- 22 - Repeat function • Select the repeat setting in the settings window. By pres- sing the "OK" button you can select between "Individual""All" and "Off". - with the "Individual" setting the current file will be repeated until another setting is implemented....

- 24 - C Make sure that there are no obstructions between the remote control and the DVD player. D When using the remote control position yourself not more than five metres from the DVD player. Playback language / subtitle language does not match thesettings in the OSD menu The playback language / s...

- 25 - S-videoWhen the DVD player is connected to a television via S-video,the brightness and colour signals are separated; this achievesbetter image sharpness and less "colour noise“. Colour noise refers to the overlaying of the colourful, usuallyhighly saturated parts of a video image with irr...

- 26 - NTSCNTSC is short for "National Television System Committee".NTSC is a colour television standard that is used primarily in the USA and Japan. SECAMSECAM is the abbreviation for the French "système en couleuravec mémoire". SECAM is currently the typical and most commoncolour t...

In order to ensure free repair, please contact the service hotline Keep your cash receipt ready for this purpose. Please write the sender's address clearly: Last name First name Street Pincode/Place Country Telephone Date/Signature Error description: Warranty Fill in this section and submit it with ...