KINGSTON 3600 - User Manual

A user manual for Kingston’s FURY Renegade DDR4-3600 memory module covers its performance, compatibility, and physical design. Key topics include technical specs like timing (3600 MHz), voltage requirements, and JEDEC/XMP profiles to optimize system operation. The document also addresses installation considerations, such as heat spreader placement and dimensional tolerances, while warning about potential risks of overclocking.

Loading the manual

DESCRIPTION

SPECIFICATIONS

KF436C16RB1A/16

16GB 2G x 64-Bit
DDR4-3600 CL16 288-Pin DIMM

Continued >>

FEATURES

FURY KF436C16RB1A/16 is a 2G x 64-bit (16GB) DDR4-3600
CL16 SDRAM (Synchronous DRAM) 2Rx8, memory module, based
on sixteen 1G x 8-bit FBGA components per module. Each module
kit supports Intel® Extreme Memory Profiles (Intel® XMP)
2.0. Each module has been tested to run at DDR4-3600 at a low
latency timing of 16-20-20 at 1.35V. The SPDs are programmed
to JEDEC standard latency DDR4-2400 timing of 17-17-17 at
1.2V. Each 288-pin DIMM uses gold contact fingers. The
JEDEC standard electrical and mechanical specifications are
as follows:

CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh
Command Time (tRFCmin)
Row Active Time (tRASmin)
UL Rating
Operating Temperature
Storage Temperature

17 cycles
45.75ns(min.)
350ns(min.)

32ns(min.)
94 V - 0
0

C to +85

-55

C to +100

FACTORY TIMING PARAMETERS

•

Default (JEDEC):

DDR4-2400 CL17-17-17 @1.2V

•

XMP Profile #1:

DDR4-3600 CL16-20-20 @1.35V

•

XMP Profile #2:

DDR4-3000 CL15-17-17 @1.35V

• Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP = 2.5V Typical

• VDDSPD = 2.2V to 3.6V

• On-Die termination (ODT)

• 16 internal banks; 4 groups of 4 banks each

• Bi-Directional Differential Data Strobe

• 8 bit pre-fetch

• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

• Height 1.66” (42.2mm), w/heatsink

Document No. 4810088A 07/08/21 Page 1

kingston.com

Memory Module Specifications

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.