Kidde Pro line - Manual
Kidde Pro line – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Introduction; General Information
- Page 9 – Remove the discharge valve assembly from the agent cylinder.
- Page 10 – pin pull loop and around the top operating lever. Remove the
- Page 11 – Some Kidde hydrostatic test recommendations:; Component Description
- Page 12 – Trouble Shooting Suggestions; Problem
- Page 13 – Dry Chemical Extinguisher Parts Diagram - Aluminum Valve; KIDDE PRO LINE STORED PRESSURE DRY CHEMICAL; The following spares parts are available for the Kidde
- Page 15 – KIDDE PRO SERIES STORED PRESSURE DRY CHEMICAL
- Page 16 – Kidde Residential and Commercial
Service Manual
Stored Pressure
Dry Chemical
Hand Portable
Fire Extinguishers
Pro Line
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Introduction This manual is designed as a guide to service personnel in the performance of operation, after use, inspection, maintenance, service and recharge of Kidde dry chemical hand portable fire extinguishers. These instructions are written and intended to be used by those personnel already fam...
9 5. Remove the discharge valve assembly from the agent cylinder. Disassemble the siphon tube and remove the spring and discharge valve stem. Note: Fire extinguisher valve assemblies are not typically indexed for orientation with other cylinders, so any time extinguisher valve assemblies are removed...
10 Note: During recharge, dry chemical agent can accumulate and pack within the siphon tube when installing the valve assembly into the cylinder. Recharge personnel should ensure the time required for total pressurization is appropriate for the model size. Extinguisher pressurization obtained too qu...
