Kidde KN-COB-B - Manual
Kidde KN-COB-B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents; Symptoms of Carbon Monoxide Poisoning; Carbon Monoxide Overview
- Page 3 – non-digital 9CO5 model; Kidde Product View
- Page 4 – Quick Set Up; Your Kidde CO Alarm is now operational.; Installation Instructions; Installation Location; • If you have only one alarm, place it near sleeping areas.; Recommended Locations
- Page 5 – Where NOT To Install Your Kidde CO Alarm; Be aware; that certain conditions can result in transient CO; Mounting; Insert the two screws provided until; Where To Install Your Kidde CO Alarm
- Page 6 – Other Possible Displays and Their Meanings; Normal Operation; Features and Operation of Digital Display Model; A reading of 0 PPM is expected under
- Page 8 – Lights; Red Alarm Light; What to do if the Alarm Sounds.; Green Operate Light; Test the unit weekly!; If this happens follow
- Page 9 – Battery Replacement/Installation Instructions; Also, note the polarity illustration in; The bottom cover of; Battery Installation/Replacement; Installation/Replacement; These batteries can be purchased at your local retailer.; Note: Constant exposure to high or low humidity may reduce
- Page 10 – Actuation of your CO; Never ignore the sound of the alarm!
- Page 11 – Never use detergents or other solvents to clean the CO alarm.; Do not paint the CO alarm.; Paint will seal the vents and; What To Do If The Alarm Sounds; WARNING
- Page 12 – Troubleshooting Guide
- Page 13 – Frequently Asked Questions; How many CO alarms do I need?; There is no formula for determining how many CO; Do I have to press the test button to get a CO reading; No. Your Kidde CO alarm continuously monitors the air; Wall Mounting Template; If you are going to mount your Kidde CO Alarm to the wall, you
- Page 14 – Limited Warranty; Product Specifications; Electrochemical carbon monoxide sensor
- Page 15 – Do not remove back cover. Back cover removal will; For Warranty Service:; Please send products and all other correspondence to:; Notes
CO Alarm Model Number
(Located on the back of alarm):
CO Alarm Assembly Number
(Located on back of alarm):
Date of Manufacture
(Located on back of alarm):
Date of Purchase:
Where Purchased:
Battery Operated
Carbon Monoxide
Alarm
User’s Guide
MODEL: KN-COPP-B
ASSEMBLY: 900-0146
MODEL: KN-COB-B
ASSEMBLY: 9CO5
For questions concerning your Carbon Monoxide Alarm,
please call our Consumer Hotline at 1-800-654-9677.
Please have the following information ready when calling:
Battery operated CO alarm
With Digital Display and
Peak Level memory
Battery operated CO alarm
without Digital display
810-2132
REV B
ATTENTION Please take a few minutes to thoroughly read this manual which
should be saved for future reference and passed on to any subsequent owner.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Table of Contents Carbon Monoxide Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Kidde Product View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Quick Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
CARBON MONOXIDE ALARM TESTRESET Operate Alarm PEAKLEVEL 4 900-0146 Digital display model Kidde Product View CARBON MONOXIDE ALARM TESTRESET Operate Alarm MOVE TOFRESH AIR 5 non-digital 9CO5 model Kidde Product View
Quick Set Up Remove the three enclosed AA batteries and install them intothe battery well. Carefully place the red battery warning flags intothe battery well. Observe the battery polarity markings at thebottom of the battery well. After approximately 30 seconds, yourCO alarm will begin monitoring fo...
