Kidde i12060A - Manual

Kidde i12060A

Kidde i12060A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
Page: / 18

Table of Contents:

  • Page 2 – CONTENTS OF THIS MANUAL; -- RECOMMENDED LOCATIONS FOR SMOKE ALARMS; RECOMMENDED LOCATIONS FOR ALARMS; neys for smoke and heat.
  • Page 4 – • Less than 4” (10cm) from the peak of an “A” frame type ceiling.
  • Page 5 – from a single circuit.
  • Page 6 – FIGURE 4 INTERCONNECT WIRING DIAGRAM; BATTERY INSTALLATION; FIGURE 5
  • Page 7 – FIGURE 6
  • Page 8 – TAMPER RESIST FEATURES; Smoke Alarm Tamper Resist Feature
  • Page 9 – OPERATION AND TESTING; HUSH; CONTROL: The “HUSH” feature has the capability of temporarily; FIGURE 9
  • Page 10 – The red LED has four modes of operation:; Hush
  • Page 12 – These smoke alarms can be purchased at your local retailer.
  • Page 13 – CLEANING YOUR ALARM; YOUR ALARM SHOULD BE CLEANED AT LEAST ONCE A YEAR; LIMITATIONS OF SMOKE ALARMS; WARNING: PLEASE READ CAREFULLY AND THOROUGHLY; dition and installed properly.
  • Page 14 – wake up a sound sleeper.; GOOD SAFETY HABITS; DEVELOP AND PRACTICE A PLAN OF ESCAPE; to do in case of fire.
  • Page 15 – WHAT TO DO WHEN THE ALARM SOUNDS; • Alert small children in the home.
  • Page 16 – NFPA REQUIRED PROTECTION
  • Page 17 – SERVICE AND WARRANTY
  • Page 18 – TEN YEAR LIMITED WARRANTY; QUESTIONS OR FOR MORE INFORMATION
Loading the manual

A.C. Wire-in Single and/or Multiple Station (up to 24 Devices) Ionization
Smoke Alarm with 9 Volt Battery Back Up and HUSH

TM

Control to temporar-

ily silence nuisance alarms.

Thank you for purchasing this smoke alarm. It is an important part of your family’s
home safety plan. You can trust this product to provide the highest quality safety
protection. We know you expect nothing less when the lives of your family are at
stake. Kidde alarms and accessories CAN ONLY BE interconnected with other Kidde
alarms and accessories as well as specified brands and models of interconnect com-
patible alarms. Connection of Kidde products to a non-specified manufacturer’s
interconnect system, or connection with non-specified equipment from another
manufacturer into an existing Kidde system could result in nuisance alarming, fail-
ure to alarm, or damage to one or all of the devices in the interconnect system.
Refer to the User’s Guide supplied with each Kidde product for interconnect com-
patible models, brands, and devices. Refer to the wiring instructions in section 3 for
NFPA initiating device limits.

For model: i12060A

Manual P/N 820-0394-EN Rev. G

1260-7205-01

i12060A

For your convenience, write down the following information. If you call

our Consumer Hotline, these are the first questions you will be asked.

Smoke Alarm Model Number
(located on back of alarm):

Date Code (located on back of alarm): The
National Fire Protection Association (NFPA)
and the manufacturer recommend replacing
this alarm ten years from the date code.

Date of Purchase:

Where Purchased:

Smoke Alarm User’s Guide

1260-7205-01(820-0394G-EN)_v1.qxd:_ 2011.5.16 10:15 AM Page 1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - CONTENTS OF THIS MANUAL; -- RECOMMENDED LOCATIONS FOR SMOKE ALARMS; RECOMMENDED LOCATIONS FOR ALARMS; neys for smoke and heat.

This alarm detects products of combustion using the ionization technique. Itcontains 0.9 microcurie of Americium 241, a radioactive material (see Section 9).Distributed under U.S. NRC License No. 32-23858-01E. Manufactured in compli-ance with U.S. NRC safety criteria in 10 CFR 32.27. The purchaser i...

Page 4 - • Less than 4” (10cm) from the peak of an “A” frame type ceiling.

MOBILE HOME INSTALLATION Modern mobile homes have been designed and built to be energy efficient.Install smoke alarms as recommended above (refer to RECOMMENDED LOCA-TIONS and FIGURES 1 and 2). In older mobile homes that are not well insulated compared to present stan-dards, extreme heat or cold can...

Page 5 - from a single circuit.

3. INSTALLATION INSTRUCTIONS WIRING REQUIREMENTS • This smoke alarm should be installed on a U.L. listed or recognized junction box. All connections should be made by a qualified electrician and all wiringused shall be in accordance with articles 210 and 300.3(B) of the U.S. NationalElectrical Code ...

Other Kidde Models

All Kidde Other