Kidde KN-COPF-I - Manuals - manualsarea.com

Page 2 - Immediately move to fresh air - outdoors or by an open; Activation of the CO; What to do When the Alarm Sounds!

Welcome Note: Many times throughout this User’s Guide, we will refer toCarbon Monoxide as “CO”. This Kidde carbon monoxide (CO) alarm is an important part of yourfamily’s home safety plan. This alarm has been designed and tested todetect CO buildup in a residential environment. Your alarm is for use...

Page 3 - General Carbon Monoxide Information

Important Warning Statements WARNING: This product is intended for use in ordinary indoorlocations of family living units. It is not designed to measure com-pliance with Occupational Safety and Health Administration(OSHA), commercial or industrial standards. It is not suitable forinstallation in haz...

Page 4 - Carbon Monoxide PPM Levels; Information About Carbon Monoxide; Conditions That Can Produce Carbon Monoxide

1. Information About Carbon Monoxide Carbon Monoxide PPM Levels This model is equipped with a digital display that shows levels of CO(displayed in PPM – parts per million). Learn the difference between dan-gerous, high, mid and low levels. Dangerous Levels: When someone is experiencing symptoms of C...

Page 5 - Product Features and Specifications; See Maintenance Section for; • Doors or other obstructions.

2. Product Features and Specifications Amber LED Digital Display Test/Reset Button Peak Level Button Alarm Sounder Green LED Red LED IMPORTANT: Seven (7) years after the initial power up, this alarmwill “beep” every 30 seconds and display "End" to indicate that itis time to replace the alarm...

Page 6 - Installation Locations; Recommended Locations

Recommended Installation Locations CO alarms should be mounted in ornear bedrooms and living areas. It isrecommended that you install a KiddeCO alarm on each level of your home. When choosing your installation loca-tions, make sure you can hear thealarm from all sleeping areas. If youinstall only on...

Page 7 - Interconnecting; Installation Instructions; Interconnect Wiring Diagram

• With 18 alarms interconnected, it is still possible to interconnect up to a total of six remote signaling devices and/or relay modules. • The maximum wire run distance between the first and last unit in an interconnected system is 1000’ (305 m). • Make certain alarms are wired to a continuous, (no...

Page 8 - Mounting

5. Alarm Characteristics 4. Installation Instructions Mounting • After selecting the proper location for your CO alarm and wiring the AC Quick-Connector harness, plug the AC Quick-Connector into the mating connector inthe back of the alarm. Be sure the con-nectors snap together securely. • Push the ...

Page 9 - Operating and Alarm Characteristics; Peak Level Memory

Whenever the alarm is operating, the green Power LED is illuminatedand the digital display will display “0” to indicate the unit is monitoringfor CO. If the alarm senses dangerous levels of CO, the red Alarm LEDwill flash, the amber LED will be lit, the digital display will indicate theCO concentrat...

Page 11 - SEVEN YEAR LIMITED WARRANTY; FOR QUESTIONS OR MORE INFORMATION

SEVEN YEAR LIMITED WARRANTY Warranty Coverage: The manufacturer warrants to the original consumer purchaser, that this product will be free of defects in material and workmanship for a period of seven (7)years from date of purchase. The manufacturer’s liability hereunder is limited to replacementof ...