Page 2 - Immediately move to fresh air - outdoors or by an open; Activation of the CO; What to do When the Alarm Sounds!
Welcome Note: Many times throughout this User’s Guide, we will refer toCarbon Monoxide as “CO”. This Kidde carbon monoxide (CO) alarm is an important part of yourfamily’s home safety plan. This alarm has been designed and tested todetect CO buildup in a residential environment. Your alarm is for use...
Page 3 - General Carbon Monoxide Information
Important Warning Statements WARNING: This product is intended for use in ordinary indoorlocations of family living units. It is not designed to measure com-pliance with Occupational Safety and Health Administration(OSHA), commercial or industrial standards. It is not suitable forinstallation in haz...
Page 4 - Carbon Monoxide PPM Levels; Information About Carbon Monoxide; Conditions That Can Produce Carbon Monoxide
1. Information About Carbon Monoxide Carbon Monoxide PPM Levels (model KN-COP-IC with digital display only) Model KN-COP-IC is equipped with a digital display that shows levels ofCO (displayed in PPM – parts per million). Learn the difference betweendangerous, high, mid and low levels. Dangerous Lev...
Page 5 - • Doors or other obstructions.
2. Product Features and Specifications Red, Alarm LED Green, Power LED Amber, InitiatingAlarm LED AC Connector Pins Tamper Resist Feature Battery Compartment Test/Reset Button Red, Alarm LED Green,Power LED Amber, InitiatingAlarm LED Peak LevelButton Test/Reset Button DigitalDisplay IMPORTANT: Seven...
Page 6 - Installation Locations; Recommended Locations; Alarm Response Times:; Product Features and Specifications
Recommended Installation Locations CO alarms should be mounted in ornear bedrooms and living areas. It isrecommended that you install a KiddeCO alarm on each level of your home. When choosing your installation loca-tions, make sure you can hear thealarm from all sleeping areas. If youinstall only on...
Page 7 - Interconnecting; Installation Instructions; Interconnect Wiring Diagram
• With 18 alarms interconnected, it is still possible to interconnect up to a total of six remote signaling devices and/or relay modules. • The maximum wire run distance between the first and last unit in an interconnected system is 1000’ (305 m). • Make certain alarms are wired to a continuous, (no...
Page 8 - Tamper Resist Tab; Mounting; AC Quick Connector; Carbon Monoxide Alarm Indicator
Tamper Resist Feature To make this CO alarm somewhat tamperresistant, a tamper resist feature has beenprovided. Activate the feature by breakingoff the four posts in the square holes inthe mounting plate. When the posts arebroken off, the tamper resist tab on thebase is allowed to engage the mountin...
Page 9 - If at any time you test the alarm and it does not perform as; Smoke Alarm Indicator (interconnected with CO Alarms); The word “Fire” will scroll across the digital display). If this; Operating and Alarm Characteristics
Whenever the alarm is operating, the green Power LED is illuminated toindicate the unit is monitoring for CO. If the alarm senses dangerous lev-els of CO, the red Alarm LED will flash and the alarm will emit an audi-ble alarm pattern. 6. Model KN-COB-IC Operating Characteristics Whenever the alarm i...
Page 10 - Peak Level Memory; The display will show three “eights” and then show a num-; Operating Characteristics
The following table illustrates the possible digital displays, describes theaudible alarm patterns, and the recommended actions to take. Operating and Alarm Characteristics LED Display Shows Alarm Sound Unit Status Recommendation Brief “888” alongwith any numberbetween 100 and 300. Red LED flashes w...
Page 11 - Battery Tab
8. Maintenance alarms will not be tested and will not alarm. However, when pressingthe Test button on an interconnected smoke alarm, the CO alarm willemit a Smoke/Fire audible and visual alarm pattern of 3 long beeps, 1second of silence, repeated. NOTE: You do not need to press the Test button to ta...
Page 12 - FIVE YEAR LIMITED WARRANTY; QUESTIONS OR FOR MORE INFORMATION
FIVE YEAR LIMITED WARRANTY Warranty Coverage: The manufacturer warrants to the original consumer purchaser, that this product (except battery) will be free of defects in material and workmanship for a periodof five (5) years from date of purchase. The manufacturer’s liability hereunder is limited to...