Page 2 - Table of Contents
Table of Contents 2 Before You Start 3 Important Safety Information 4 Assembly 5-40 Weight Ratios 41 Weight Stack Sticker Placement 42 Cable View 43 Top View 44 Exploded View 45 Parts List 46 Warranty Information 47
Page 3 - Before You Start; KEYS FITNESS SERIES; Model Name Decal Location; THANK YOU; for making this unit a part of your exercise program.; REGISTRATION CARD
Before You Start KEYS FITNESS SERIES Q U E S T I O N S ? CALL 1 - 8 8 8 - 3 8 0 - 0 4 8 2 M o n d a y - F r i d a y 8 : 3 0 - 5 : 3 0 C e n t r a l T i m e When calling please have the following product information available: Model Name : KF-2060Serial #:Manufactured Date :PO # : Model Name Decal Lo...
Page 4 - NOTE
Important Safety Information Prior to assembly, remove components from the box and verify that all the listed parts were supplied. WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with...
Page 5 - Assembly
Page 15 - Step 1; Figure 1
Step 1 Attach Right Base Frame (4) to Rear Frame (1) using two Nuts (144), four Washers (143), and two Bolts (137). Attach Left Base Frame (8) to Rear Frame (1) using two Nuts (144), four Washers (143), and two Bolts (137). Insert Guide Rods (47) into Rear Frame (1). Next, slide Weight Stack Bumpers...
Page 16 - Figure 2
Assembly 16 Step 2 Slide the weight plates down the Guide Rods (47) in this order - five 15lb Plates (52), nine 10lb Plates (53), five 5lb Plates (54), and the Top Plate (55). Note: Number of weight plates may vary depending on your specific configuration. Attach Top Frame (2) to all four Guide Rods...
Page 17 - Figure 3
Assembly 17 Step 3 Attach Front Upright (19) to Seat Pad Support Receptacle (6) using two Nuts (144), four Washers (143), and two Bolts (136). Attach Seat Pad Support Receptacle (6) to Base Frame assembly using two Nuts (144), four Washers (143), and two Bolts (136). Figure 3
Page 18 - Figure 4
Step 4 Attach Main Upright (7) to Seat Pad Support Receptacle using two Nuts (126), four Washers (125), and two Bolts (131). Attach Right Top Frame (5) to Top Frame assembly using two Nuts (144), four Washers (143), and two Bolts (137). Next, use two Washers (143), two Spring Washers (119), and two ...
Page 19 - Figure 5
Step 5 Slide Press Station Base Frame (11) over Press Arm Support (10). Next, attach both pieces to Base Frame using two Nuts (144), four Washers (143), and two Bolts (134). Install Left Top Frame over Press Arm Support (10) and Top Frame assembly. Secure top section using two Nuts (144), four Washe...
Page 20 - Figure 6
Assembly 20 Step 6 Attach Pec Dec Mount (21) onto Seat Pad Support Receptacle using two Nuts (144), four Washers (143), and two Bolts (136). Secure in place with one Washer (129), one Spring Washer (119), and one Bolt (137). Figure 6
Page 21 - Figure 7
Assembly 21 Step 7 Attach Right and Left Leg Hold Leg Frames (29 & 30) using two Nuts (144), four Washers (143), and two Bolts (135). Figure 7
Page 22 - Figure 8
Assembly 22 Step 8 Slide the Right Pec Dec Arm (22) on to the shaft of the Pec Dec Mount. Secure the arm in place using one Big Washer (102), one Washer (143), one Spring Washer (119), and one Bolt (128). Slide Pec Dec Handle Bar (24) onto the top of the Right Pec Dec Arm (22) and secure using one C...
Page 23 - Figure 9
Assembly 23 Step 9 Attach Leg Extension Lever (20) to Seat Pad Support Receptacle (6) and secure using Shaft (86), one Washer (117), one Spring Washer (118), and one Allen Bolt (98). Slide Foam Frame w/ Shaft (26) through the Leg Extension Lever (20) and attach Foam Frame w/o Shaft (25) to the other...
Page 33 - do not
Assembly 33 Step 19 Note: This step is only used if you do not have the Leg Press 3 attachment. If you do have Leg Press 3 attachment, please follow instructions located in that manual. Use the Cable Adapter (124) in place of the pulley. Note: Stretch all cables out completely and make sure all twis...
Page 40 - You have completed the assembly of your new KF-2050.
Assembly 40 Congratulations! You have completed the assembly of your new KF-2050.
Page 41 - Weight Ratios
Page 42 - Weight Stack Sticker Placement
Weight Stack Sticker Placement 42 10 10 15 20 20 25 30 40 5060 70 8090 100 30 35 455565 7585 95 105 115 115 125 140 155 170 130 145 160 175190 205220 235 250 185200 200 LB Stack 250 LB Stack Your new POWER SYSTEM unit can be purchased with either a 200 LB or 250 LB weight stack. Depending on which w...
Page 43 - Cable View
Page 44 - Top View
Page 45 - Exploded View
Page 46 - Parts List
KF-2060 Parts List Rev A Ref # Part # Description Qty Ref # Part # Description Qty 1 223-01077 FRAME, REAR KF-2060 1 85 206-00056 SHORT HANDLE GRIPS KPS-1800 1 2 223-01078 FRAME, UP KF-2060 1 86 230-00022 SHAFT FOR LEG EXT. KPS-2050 1 3 223-01079 UPRIGHT, REAR KF-2060 1 87 210-00008 GEAR HOOK, KPS, ...
Page 47 - Warranty Information; LIFETIME WARRANTY
47 Warranty Information KEYS FITNESS PRODUCTS, L.P. LIFETIME WARRANTY This Warranty applies in the United States and Canada to products manufactured or distrib- uted by Keys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty is non- transferable and valid only to the original purc...