Keys Fitness 1850 - Manuals

Keys Fitness 1850 – Manual in PDF format online.

Manuals:

Manual

Manual Keys Fitness 1850

Summary

Page 2 - Table of Contents

Table of Contents 2 Important Safety Information 3 Before You Start 4 Assembly 5-26 Weight Ratios 27 Weight Stack Sticker Placement 28 Cable View 29 Top View 30 Exploded View 31 Parts List 32 Warranty Information 33

Page 3 - Important Safety Information; THANK YOU; for making this Power System unit a part of your exercise pro-; REGISTRATION CARD; • Product Series

Important Safety Information 3 THANK YOU for making this Power System unit a part of your exercise pro- gram. Keys Fitness and our Power System Series assures the very best in value,appearance, durability and biomechanics. This manual will guide you through the assembly process. If at any time you a...

Page 5 - Assembly

Page 10 - STEP 1; Figure 1

STEP 1 Insert the two Guide Rods (24) into Rear Base (1) and secure them in place using two Washers (102), two Spring Washers (103), and two Allen Bolts (97). Assembly 10 Figure 1

Page 11 - Figure 2

Assembly 11 STEP 2 Attach the Seat Pad Support Receptacle (2) to Rear Base (1) and secure in place using three Nylon Locknuts (104), six Washers (102), and three Bolts (94). Connect the Front Upright (86) to Seat Pad Support Receptacle (2) and secure together using two Nylon Locknuts (104), four Was...

Page 12 - Figure 3

Assembly 12 Step 3 Install the Main Upright (3) onto Seat Pad Support Receptacle (2). Secure it in place using three Nylon Locknuts (104), six Washers (102), and three Bolts (94) on the side. Two Bolts (98), one Spring Washer(117), three Washers (101), one Nylon Locknut (95) will secure it at the bo...

Page 13 - Figure 4

Assembly 13 Step 4 Slide one Weight Stack Bumper (30) down each Guide Rod (24). Next, slide the weight plates down the Guide Rods (24) in this order - five 15lb Plates (36), nine 10lb Plates (37), five 5lb Plates (38), and the TopPlate (27). Insert the Main Top Beam (4) onto the two Guide Rods (24) ...

Page 14 - Figure 5

Step 5 Attach Press Arm Support (5) to Main Upright (3) by aligning the holes and sliding the Shaft (74) through. Secure the Shaft (74) in place using two Set Screws (84).Install Press Arm (6) to Press Arm Support (5) by aligning the holes and sliding the Shaft (73) through. Secure the Shaft (73) in...

Page 15 - Figure 6

Assembly 15 Step 6 Slide the Right Pec Dec Arm (8) on to the shaft of the Pec Dec Mount (7). Secure the arm in place using one Big Washer (76), one Washer (102), one Spring Washer (103), and one Allen Bolt (97). Slide Pec Dec Handle Bar (19) onto the top of the Right Pec Dec Arm (8) and secure using...

Page 16 - Figure 7

Assembly 16 Step 7 Install the Right and Left Hold Leg Frames (17 & 18) to Main Upright (3) and secure using two Nylon Locknuts (104), four Washers (102), and two Bolts (95). Make sure the both Hold Leg Frames are angled upwards. Figure 7

Page 17 - Figure 8

Assembly 17 Step 8 Slide the Shaft (72) into the Leg Extension Lever (10). Attach Leg Extension Lever (10) to Seat Pad Support Receptacle (2) and secure using one Washer (119), one Spring Washer (115), and one Allen Bolt(118). Slide Foam Frame w/ Shaft (11) through the Leg Extension Lever (10) and a...

Page 18 - Figure 9

Assembly 18 Step 9 Attach the Seat Pad (26) to the Seat Pad Support (13) using two Washers (102) and two Allen Bolts (96). Slide the Seat Support assembly into the Seat Pad Support Receptacle (2) and secure by tightening theLocking Pop Pin (52). Install the Telescope (14) to the Back Pad Support (16...

Page 22 - do not

Assembly 22 Step 13 Note: This step is only used if you do not have the Leg Press 2 attachment. Use the Cable Adapter (113) in place of the pulley. Note: Stretch all cables out completely and make sure all twisting is removed before installing. Install Leg Press Cable Substitute (47) as detailed in ...

Page 27 - Weight Ratios

Weight Ratios 27 KPS-1850 Weight(lbs) 100% 95% 90% 65% 45% 10 10 9.5 9 6.5 4.5 15 15 14.25 13.5 9.75 6.75 20 20 19 18 13 9 25 25 23.75 22.5 16.25 11.25 30 30 28.5 27 19.5 13.5 35 35 33.25 31.5 22.75 15.75 45 45 42.75 40.5 29.25 20.25 55 55 52.25 49.5 35.75 24.75 65 65 61.75 58.5 42.25 29.25 75 75 71...

Page 28 - Weight Stack Sticker Placement

Weight Stack Sticker Placement 28 10 10 15 20 20 25 30 40 50 60 70 80 90 100 30 35 45 55 65 75 85 95 105 115 115 125 140 155 170 130 145 160 175 190 205 220 235 250 185 200 200 LB Stack 250 LB Stack Your new POWER SYSTEM unit can be purchased with either a 200 LB or 250 LB weightstack. Depending on ...

Page 29 - Cable View

Page 30 - Top View

Page 31 - Exploded View

Page 32 - Parts List

REF# KEYS PART# DESCRIPTION QTY. REF# KEYS PART# DESCRIPTION QTY. 1 223-00235 Rear Base 1 61 206-00020 Square Plug 44.5 2 2 223-00236 Seat Pad Support Receptacle 1 62 206-00140 Square Plug 50.8 2 3 223-00237 Main Upright 1 63 206-00001 Square Plug 76.2*50.8 4 4 223-00238 Main Top Beam 1 64 206-00102...

Page 33 - Warranty Information; POWER SYSTEM SERIES

Warranty Information KEYS FITNESS PRODUCTS, L.P. POWER SYSTEM SERIES LIFETIME WARRANTY This Warranty applies in the United States and Canada to products manufactured or distributed byKeys Fitness Products, LP (“Keys”) under the KEYS brand name. The warranty period to the originalpurchaser is lifetim...