Kenmore DS4030 - User Manual

- 6 - VACUUM CLEANER WARRANTY LIMITED WARRANTY FOR ONE YEAR from the date of sale this product is warranted against defects inmaterial or workmanship. WITH PROOF OF SALE a defective product will be replaced free of charge. The Kenmore brand is used under license. Direct all claims for warranty servi...

- 7 - PARTS AND FEATURES It is important to know your vacuum cleaners parts and features to assure its proper and safe use. Review these before using your vacuum. REPLACEMENT PARTS To order a replacement part, call 1-877-531-7321 (US) / 1-844-608-3081 (CA). Item Part No.(US) Part No.(CA) HEPA Media ...

- 8 - PARTS AND FEATURES Hand Vacuum 2-in-1 Combination Tool Screw (2) Motorized Nozzle Charging Adapter Wand Wall Mountable Bracket

- 10 - 1. Insert the hand vacuum into the top of the wand until you hear a click. Before assembling the vacuum cleaner, check the PACKING LIST (Page 2). Use this list to verify that you have received all the components of your new Kenmore CSV Go Cordless Stick Vac. ASSEMBLY INSTRUCTIONS 2. Insert th...

- 11 - 1. Insert the charging adapter plug into the charging port on the side of the hand vacuum base. 2. Plug the adapter into a wall outlet. The battery indicator will begin to pulse blue. WARNING Before charging make sure the unit is turned OFF. CHARGING NOTE: The unit can be charged while it is ...

- 13 - USING THE EASYREACH ™ WAND In order to easily access hard-to-reach areas under furniture without having to bend down, press the Easyreach ™ wand button to position the wand into a lower angle. To take the vacuum back to the straight position, lift up the handheld vacuum. Once straightened, th...

2. Close dust cup lid until you hear a click. NOTE: For optimal performance, please check and clean the HEPA Media filter regularly. WARNING: Do not operate vacuum cleaner without filters in place.1. With one hand grasped around the handle, press the filter release button to separate the dust cup an...

Brush Roll Manual Cleaning 1. Make sure the vacuum cleaner is turned off. Remove the wand and the hand vacuum from the motorized nozzle and set aside. 2. Turn the nozzle over to access the brush roll. As shown below, press and push the tab on the left hand side of the nozzle to the left and hold it....

NOTE: It is recommended to store the vacuum within a temperature range between 39.2°F (4°C) and 104°F (40°C). Hose & Wand Blockage Removal 1. To clean out the hose and wand, press the wand release button on the motorized nozzle, and pull the motorized nozzle away from the wand. 2. Carefully remo...

- 18 - Review the table for solutions to minor performance problems. Any service needed, other than maintenance described in this Use & Care Guide, should be performed by a qualified service dealer. TROUBLESHOOTING WARNING Disconnect electrical supply before performing maintenance to the vacuum ...

- 19 - TROUBLESHOOTING Brush roll in the motorized nozzle is not turning. Brush roll is jammed. Remove obstruction. Follow instructions on page 16. Brush roll is not installed properly. Remove the brush roll and reinstall as instructed on page 16. Debris accumulates on metal contacts connecting the ...