Jura Z9 - Manual

5 IMPORTANT SAFEGUARDS The appliance is designed and intended for household use only. It shall only be used for coffee preparation and to heat milk and water, according to these instructions. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility ...

6 IMPORTANT SAFEGUARDS This appliance is for household use. Any servicing other than cleaning and user maintenance shall be performed by an authorized service representative: Z Do not immerse base in water or try to disassemble. Z Do not put the appliance or any individual parts in the dishwasher. Z...

7 IMPORTANT SAFEGUARDS Z Never fill instant coffee, chocolate mix etc. into the bean container or ground coffee funnel (filler funnel for ground coffee). It will damage the functioning of the brewing chamber. Z Never fill sugar coated coffee beans into the bean container. In case of doubt, call your...

8 Control elements Control elements 4 11 1 2 7 6 5 3 9 12 14 13 8 10 J HOT J HOT J HOT 1 Bean container cover 2 Water tank cover 3 Water tank 4 Power switch and power cord  (side of machine) 5 Height-adjustable cappuccino frother 6 Coffee grounds container 7 Drip tray 8 Grinder adjustment switch 9 B...

9 Control elements 3 1 2 4 5 Top of the machine 1 Q On/Off button 2 g Rotary Switch 3 O P button (programming) Front 4 Display 5 Multi-function buttons (button function depends on what is shown in the display)

10 1 Preparing and using for the first time 1 Preparing and using for the first time Visit us on the Internet. On the JURA website (www.jura.com) you will find interesting and up-to-date information on your IMPRESSA and on every aspect of coffee. When setting up your IMPRESSA, please note the follow...

12 1 Preparing and using for the first time T   Open the filter holder and insert the filter cartridge into the water tank, exerting slight pressure. T   Close the filter holder. It will click into place audibly. E After three months, the filter will cease to work. Set the date on the date plate on ...

13 1 Preparing and using for the first time Milk, sparkling mineral water or other liquids can damage the water tank or the machine. T   Only fill the water tank with fresh, cold water. T   Press the ‘Inactive’ button. T   Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Water hardn...

14 1 Preparing and using for the first time You can find out what the water hardness is by using the Aquadur® test strip supplied as standard. T   Hold the test strip briefly (for 1 second) under flowing water. Shake off the water. T   Wait for about 1 minute. T   You will then be able to read the d...

15 1 Preparing and using for the first time T   Turn the grinder adjustment switch to the desired position while the grinder is running. The espresso is prepared and the consistency of grind is adjusted. T   Close the bean container cover. Daily maintenance of the machine and hygiene when handling m...

16 1 Preparing and using for the first time T   Connect the other end of the milk pipe to a milk container or immerse it in a milk carton (Figure: JURA 20 oz (0.6 liter) stainless steel vacuum milk container).

17 2 Preparation 2 Preparation Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn. T   Use extreme care when handling hot liquid or steam. T   Allow liquid to cool down before drinking. T   In the event of scalding, rinse affected area with cold water and seek medical...

18 2 Preparation U ‘Latte macchiato’ U ‘Hot water’ U ‘1 portion milk’ U Using the product selector (Rotary Selection): Only some of the products you can prepare are shown on the start screen. As soon as you turn the Rotary Switch, more products are displayed in a product selector. Turn the Rotary Sw...

19 2 Preparation ‘Espresso’ and ‘Coffee’ are prepared at the touch of a button following this model. Example:  Proceed as follows to prepare one coffee at the touch of a button. Precondition:  ‘Please select product:’ is displayed. T   Place a cup under the coffee spout. T   Press the ‘Coffee’ butto...

20 2 Preparation T   Press the ‘Espresso’ button. ‘Coffee strength’ appears on the display.   g   T   Turn the Rotary Switch to adjust the coffee strength.   k   T   Press the Rotary Switch to confirm the setting. ‘Volume’  / ‘1.5 oz’ (45 ml) appears on the display.   g   T   Turn the Rotary Switch ...

21 2 Preparation T   Press the ‘Latte macchiato’ button. ‘Latte macchiato’ , the milk foam is prepared. Preparation stops automatically when the preset amount of milk is reached. E There is a short interval while the hot milk separates from the milk foam. This allows the typical layers of a latte ma...

22 2 Preparation You can choose to use a second coffee variety, for example decaffeinated coffee, with the filter funnel for ground coffee. E Never add more than two level measuring spoons of ground coffee. E Use ground coffee which is not ground too finely. Very fine coffee can block up the system ...

23 2 Preparation It is easy to permanently adjust the amount of water and milk for all products to the cup size. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount will be dispensed. The permanent settings for adapting the amounts to t...

24 2 Preparation The following temperatures can be selected for preparing hot water: ‘Normal’ , ‘X high’ , ‘Low’ . There is a danger of scalding from hot water splashes. T   Avoid direct contact with the skin. Example:  Proceed as follows to prepare hot water. Precondition:  ‘Please select product:’...

25 3 Daily operation 3 Daily operation Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily. When the IMPRESSA is switched on, it automatically prompts you to perform th...

26 3 Daily operation T   Wipe the surface of the machine with a clean, soft, damp cloth (e.g. microfiber cloth). E In the interests of hygiene, we recommend changing the milk pipe on a regular basis (approx. every 6 months). Replacement pipes are available from specialized dealers. When you switch y...

27 4 Permanent settings in programming mode 4 Permanent settings in programming mode Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn. T   Use extreme care when handling hot liquid or steam. T   Allow liquid to cool down before drinking. T   In the event of scalding...

28 4 Permanent settings in programming mode Program item Sub-item Explanation ‘Maintenance settings (6/7)’ ‘Filter’ , ‘Water hardness’ (only if filter is not activated), ‘Switch-on rinse’ , ‘Rinse the milk system’ T Indicate whether you are operating your IMPRESSA with or without a CLEARYL Blue filt...

29 4 Permanent settings in programming mode Product Temperature Coffee strength Amount Portion of milk – – Amount of milk: ‘3 sec.’  –  ‘120 sec.’ Hot water ‘X high’ , ‘Normal’ , ‘Low’ – Volume: ‘0.5 oz’  –  ‘15.0 oz’ (25 ml – 450 ml) Example:  Proceed as follows to change the amount of milk for a l...

31 4 Permanent settings in programming mode In the program item ‘Product settings (3/7)’  / ‘Programming’ you can rename all the products stored on the start screen or the product selector. Example:  Proceed as follows to change the product name from ‘Coffee’ to ‘My coffee’ . Precondition:  ‘Please ...

32 4 Permanent settings in programming mode U ‘Save Level 2’ U After switching on, your IMPRESSA is ready for use for all specialty coffees with and without milk, as well as hot water. U Soon after the last preparation, the IMPRESSA stops heating up. After about 5 minutes the message ‘Energy Save’ i...

33 4 Permanent settings in programming mode   g   T   Turn the Rotary Switch until the program item ‘Machine settings (4/7)’ is displayed. T   Press the ‘Switch off after’ button. ‘2 hrs.’   g   T   Turn the Rotary Switch until ‘1 hrs.’ is displayed. T   Press the ‘Save’ button. ‘Saved’ appears brie...

34 4 Permanent settings in programming mode U ‘Product’ U The settings (amount of water, coffee strength, temperature etc.) for any product can be reset individually to the factory settings. The corresponding double product is also reset to the factory settings at the same time. U ‘Machine’ U All us...

35 4 Permanent settings in programming mode U ‘Rinse the milk system’  / ‘Automatic’ U Milk system rinsing is automatically initiated approx. 30 seconds after preparation of a specialty coffee with milk. Example:  Proceed as follows to make the machine rinse the milk system automatically after prepa...

36 4 Permanent settings in programming mode T   Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Maintenance settings (6/7)’   O   T   Press the P button to exit programming mode. ‘Please select product:’ In the program item ‘Machine settings (5/7)’  / ‘Units’ you can select the uni...

37 4 Permanent settings in programming mode T   Press the ‘Colour scheme’ button. ‘Colour scheme’   g   T   Turn the Rotary Switch to select a different background. T   Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Machine settings (5/7)’   O   T   Press the P button to exit prog...

38 5 Maintenance 5 Maintenance Use of maintenance products that are harmful to health and discharge of liquids during maintenance program. Harmful if swallowed. Irritating to eyes and skin. T   Keep children AWAY. T   Keep children away from the machine while it is performing a maintenance program. ...

39 5 Maintenance You can initiate the rinse operation manually at any time. Precondition:  ‘Please select product:’ is displayed. T   Place a receptacle under the coffee spout.   O   T   Press the P button. ‘Maintenance status (1/7)’   g   T   Turn the Rotary Switch until the program item ‘Maintenan...

43 5 Maintenance E After 2000 oz (60 liters) of water have flowed through, the filter will cease to work. Your IMPRESSA will automatically prompt you to change the filter. E After three months, the filter will cease to work. Set the date on the date plate on the filter holder in the water tank. E If...

44 5 Maintenance E The water may be slightly discolored. This is not harmful to health and does not affect the taste. Rinsing of the filter stops automatically after approximately 17 oz (500 ml). ‘Please select product:’ appears on the display. After 220  preparations or 80  switch-on rinses, the IM...

46 5 Maintenance The IMPRESSA builds up deposits of limescale over time and auto-matically prompts you to descale it when necessary. The degree of calcification depends on the hardness of your water. Non-recommended descaling agents (e.g. vinegar) may contain substances that could damage the machine...

48 5 Maintenance T   Empty the drip tray and coffee grounds container and put them back into the machine. ‘Please select product:’ appears on the display. Descaling is now complete. Your IMPRESSA is once more ready for use. E If the descaling operation stops unexpectedly, rinse the water tank thorou...

49 6 Display messages 6 Display messages Message Cause/Result Action ‘Fill water tank.’ The water tank is empty. You cannot prepare any products. T Fill the water tank (see Chapter 1 ‘Preparing and using for the first time – Filling the water tank’). ‘Empty coffee grounds container.’ The coffee grou...

51 7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action When preparing a latte macchiato, the typical three layers do not form. – T  Turn the setting wheel of the cappuccino frother to the far right and the Milk Foam position  ü . T Change the length of the interval to at least 30 seconds...

53 8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Keep the packaging for your IMPRESSA. It should be used to protect the machine during transport. In order to protect the IMPRESSA from frost during transport, the system must be emptied. Preconditi...

54 9 Technical data 9 Technical data Voltage 120 V ~, 60 Hz Power 1250 W Conformity mark Energy consumption ‘Save No’ Approx. 26 Wh Energy consumption ‘Save Level 1’ Approx. 13 Wh Energy consumption ‘Save Level 2’ Approx. 17 Wh Pump pressure Static, max. 15 bar Holding capacity of water tank 96 oz (...

60 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AGKaffeeweltstrasse 10CH-4626 NiederbuchsitenSwitzerland USA: JURA Inc. Canada: FAEMA Customer Service PhoneE-Mail [email protected] 1-(855)[email protected] Opening...