Jura Z5 - Manual

10 CONFIRMED √ PRESS MAINTENANCE Maintenance key (C) lights up. Place a cup each under the height-adjustable coffee spout (12)and the cappuccino nozzle (4) and press the maintenance key (C). SYSTEM FILLS The system now fills up automatically. While it is doing so, themaintenance key flashes. (A litt...

12 INSERT FILTER PRESS BUTTON Remove the water tank from the IMPRESSA. Empty out anyremaining water. Fold up the cartridge holder (Fig.6). Attach theextension piece to the top of the CLARIS plus filter cartridge.Now insert the filter cartridge in the water tank, applying gentlepressure (Fig. 6). Clo...

15 CAPPU RINSE Place a sufficiently large receptacle (ca. 0.5 litres) under the cap-puccino nozzle (4). Turn the selector switch (1, Fig. 9) to the steam range (c, Fig. 9). Press the maintenance key (C) to start the cappuccino rinsing cycle. CAPPUCCINO RINSING COFFEE READY You can also trigger a cap...

17 You can change the amount of water set while the machineis dispensing hot water. To do so, turn the Rotary Switch (B)until the display indicates the required amount (ML). Theamount of water can be selected in increments of 5 ML. The amounts given in ML are approximate values and mayvary from the ...

19 When the machine has dispensed as much milk as you wanted,briefly press the key once more. CONFIRMED √ The amount of milk to be dispensed is now programmed. ENOUGH ? PRESS BUTTON When you have made as much coffee as you wanted, brieflypress the key once more. CONFIRMED √ The amount of coffee to b...

21 COFFEE READY Press the Rotary Switch (B) until you hear an acoustic signal. FILTER NO or YES Turn the Rotary Switch (B) until the following message is dis-played: TEMPERATURE Press the Rotary Switch (B) to start programming. TEMPERATURE COFFEE READY Then press a product key of your choice. 1 ESPR...

24 Now press the Rotary Switch (B) to leave the programmingmode. COFFEE READY Save energy: No Selecting this level puts the IMPRESSA in constant stand-bymode.This setting allows you to make coffee or frothed milk withouthaving to wait for the machine to heat up. This setting is useful if you make a ...

32 After another 10 products, the display will change. Please run thecleaning cycle immediately (see Chapter 17). CLEAN NOW CLEAN (flashing) 16.11 Information about decalcify Lime scale builds up in the IMPRESSA as a result of normal use.The degree of calcification depends on the hardness of the wat...

35 You will hear an acoustic signal. TRAY / GROUNDS EMPTY Empty the drip tray (1) and the coffee grounds tray with thecontainer (3). TRAY MISSING Place the empty, clean drip tray (1) and the coffee grounds traywith the container (3) back into the IMPRESSA. COFFEE READY You can also trigger a decalci...

37 22. Legal information These operating instructions contain all the information requiredfor using, operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained inthese operating instructions is required for using the machine safelyas well as for ope...