Page 2 - Your ENA 9
2 Table of contents Your ENA 9 Control elements 4 Important information 6 Proper use .................................................................................................................................................................6 For your safety .......................................
Page 3 - Symbol description
3 pt es nl it fr ru en de Table of contents Dismantling and rinsing the dual spout ............................................................................................................ 18 Changing the filter.........................................................................................
Page 4 - Control elements
4 Control elements Control elements 1 Water tank 2 Powder chute for ground coffee 3 Mains cable (back of the machine) 4 Milk pipe 5 Coffee grounds container 6 Drip tray 7 Cup platform 8 Bean container cover 9 l Switch for hot water preparation 10 Hot-water nozzle 11 Height-adjustable dual spout
Page 6 - Important information; Proper use; To avoid danger of potentially fatal electric shock:
6 Important information Important information Proper use The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibilit...
Page 7 - Preparing and using for the; JURA on the Internet; Filling the bean container; CAUTION
7 1 Preparing and using for the first time pt es nl it fr ru en de U are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly. Safety when handling the CLARIS Blue filter cartridge:...
Page 8 - WARNING; Inserting and activating the filter; and hold
8 1 Preparing and using for the first time T Remove any dirt or foreign objects from inside the bean container. T Fill the bean container with coffee beans. T Close the bean container. First-time use E The On/Off button also acts as a power switch. When the ENA is switched off, the machine does not ...
Page 9 - Determining the water hardness
9 1 Preparing and using for the first time pt es nl it fr ru en de T Insert the filter cartridge into the water tank, exerting slight pressure. T Close the filter holder. It will click into place audibly. E After two months, the filter will cease to work. You can check the elapsed time by referring ...
Page 10 - Adjusting the grinder; Preparation; coffee strength; Coffee
10 2 Preparation k T Press the Rotary Switch to enter the programme item. 16°dH g T Turn the Rotary Switch until 25°dH is displayed. k T Press the Rotary Switch to confirm the setting. OK , the water hardness is set. HARDNESS g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary S...
Page 11 - twice; Aroma Boost; no higher
11 2 Preparation pt es nl it fr ru en de Preparing two speciality coffees at the touch of a button The preparation of 2 espressi and 2 coffees follows this same model. Example: Prepare two espressi. Precondition: READY is displayed. T Place two espresso cups under the dual spout. ) T Press the Aroma...
Page 12 - Ground coffee
12 2 Preparation Example: Permanently adjust the amount of water for one coffee to the cup size. Precondition: READY is displayed. T Place a cup under the dual spout. > T Press and hold the Coffee button. 1 COFFEE , the grinding operation starts. > T Continue to hold the Coffee button down unt...
Page 13 - Hot water; Daily; Switching on the machine; not consume; Permanent settings in pro-; Products; latte macchiato and cappuccino:
13 3 Daily operation pt es nl it fr ru en de Hot water J CAUTION There is a danger of scalding from hot water splashes. T Avoid direct contact with the skin. Precondition: READY is displayed. T Place a cup under the hot-water nozzle. l T Turn the switch anticlockwise to position m . WATER , hot wate...
Page 15 - Automatic switch-off; Rinses; immediately
15 4 Permanent settings in programming mode pt es nl it fr ru en de k T Press the Rotary Switch to confirm the setting. OK , the energy-saving mode is set. ENERGY p g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode. READY Automatic switch-off By...
Page 16 - Unit for amount of water; Language; Maintenance; Rinsing the machine
16 5 Maintenance T Press the Rotary Switch to exit the pro- gramme item. RINSES g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode. READY Unit for amount of water You can change the unit for the amount of water from ‘ml’ to ‘oz’. Example: Change ...
Page 17 - Rinsing the milk system; daily
17 5 Maintenance pt es nl it fr ru en de k T Press the Rotary Switch to initiate the rinse operation. RINSING , the system rinses itself, stopping automatically. READY Rinsing the milk system After each milk preparation, the ENA prompts you to perform a cappuccino rinse. Precondition: CAPPUCCINO RIN...
Page 18 - Dismantling and rinsing the dual spout; Changing the filter
18 5 Maintenance Dismantling and rinsing the dual spout The dual spout should be dismantled and rinsed daily if milk has been prepared to make sure it functions perfectly. Your ENA will not prompt you to clean the dual spout. T Remove the milk pipe and rinse thoroughly under running water. T Press t...
Page 19 - Cleaning the machine
19 5 Maintenance pt es nl it fr ru en de E If the CLARIS Blue filter cartridge is not activated in programming mode, you will not be prompted to change the filter. Precondition: FILTER / READY is displayed. T Open the cover behind the Rotary Switch. c T Press the Maintenance button. INSERT FILTER T ...
Page 20 - Descaling the machine
20 5 Maintenance T Open the powder chute for ground coffee and drop in a JURA cleaning tablet. T Close the powder chute for ground coffee. PRESS ROTARY k T Press the Rotary Switch. CLEANING , water flows out of the dual spout repeatedly. EMPTY TRAY T Empty the drip tray and coffee grounds container ...
Page 21 - Descaling the water tank
21 5 Maintenance pt es nl it fr ru en de T Place one receptacle each under the hot-water nozzle and the dual spout. l T Turn the switch anticlockwise to position m . DE-SCALING , water flows out of the hot-water nozzle repeatedly. CLOSE TAP y T Turn the switch clockwise to position o . DE-SCALING , ...
Page 22 - Display
22 6 Display messages 6 Display messages Message Cause/Result Action FILL WATER TANK The water tank is empty or not correctly inserted. You cannot prepare any products. T Fill the water tank (see Chapter 1 ‘Preparing and using for the first time – Filling the water tank’). T Insert the water tank. E...
Page 23 - Troubleshooting; FILL WATER TANK
23 7 Troubleshooting pt es nl it fr ru en de 7 Troubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed or milk sprays from the dual spout. The dual spout is dirty. T Clean the dual spout (see Chapter 5 ‘Maintenance – Cleaning the milk system’). T Dismantle ...
Page 24 - Transport and environmentally; Transport / Emptying the system; Technical; A S; ECONOMY p
24 8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Transport / Emptying the system Keep the packaging for your ENA. It should be used to protect the machine during transport. In order to protect the ENA from frost during transport, the system must ...
Page 27 - 1 JURA contact details / Legal; Directives
27 11 JURA contact details / Legal information pt es nl it fr ru en de 11 JURA contact details / Legal information JURA Elektroapparate AGKaffeeweltstrasse 10CH-4626 NiederbuchsitenTel. +41 62 38 98 233 @ You will find additional contact details for your country at www.jura.com. Directives The machi...
