Jura IMPRESSA S70 - Manual - manualsarea.com

Page 2 - please follow the instructions shown.; English

Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Note = Important = Tip Jura Impressa S70 / X70 English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 6 - Table of contents

6 Table of contents Jura Impressa S70/ X70 1. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7 2. Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7 2.1 Warnings . . . . . . . . ...

Page 8 - FILL WATER; Rinsing the machine

8 If using acidic decalcifying agents be sure to immediately re-move any splashes and drops from delicate surfaces, especiallynatural stone and wooden surfaces, or take corresponding pre-cautions. 3. Check before use 3.1 Checking mains voltage The machine is set for the correct voltage before leavin...

Page 9 - Adjusting for water hardness; Use of Claris filter cartridges; PRESS KEY / POWDER QUANTITY

9 6. Adjusting for water hardness The water is heated inside the machine. With use, this leads tocalcium deposits (furring) forming on the machine. This will beautomatically indicated on the display.For this reason, it is necessary to adjust the machine to thehardness of your local water before you ...

Page 10 - Replacing of filter; RINSE FILTER / OPEN TAP; Drawing off coffee; RINSE UNIT; Drawing off powder coffee

10 YES flashes To confirm press key . An acoustic signal can be heard. RINSE FILTER / OPEN TAP Place a sufficiently large container (approx. 1 litre) under thepivoting nozzle (20). Turn selector switch for coffee or hot wa-ter/steam (19) to position . PLEASE WAIT / FILTER RINSING CLOSE TAP (the syst...

Page 11 - Drawing off hot water

11 FILL POWDER Now put 1 or 2 level measuring spoons of pre-ground coffee intothe pre-ground powder funnel (14). Put 1, respectively 2 cups under the coffee-spout and press therequired key. Never use soluble instant coffee or quick coffee. Only usecoffee powder from freshly ground beans or pre-groun...

Page 12 - Programming POWDER QUANTITY; II; Programming coffee temperature; ENOUGH COFFEE / PRESS KEY

12 12. Programming Before leaving our factory, the machine is adjusted to enable youto obtain coffee without any additional programming. In order toadapt the result to your personal taste, various settings can be pro-grammed individually. The programming keys are located behindthe front cover (3). T...

Page 14 - Empty grounds container; EMPTY GROUNDS; Empty drip tray; EMPTY TRAY

14 To switch off the automatic timer proceed as follows:Press key Press key UNIT ON —:— 12.9 Programming automatic switch off time OFF AFTER 5.0 HOURS Press key By briefly pressing key or you can set the hours and then confirm by pressing key (0.5 to 9.0 hours). You can call up the next setting by p...

Page 15 - Removing foreign objects; immediate; Cleaning metal contacts

15 13.4 Fill beans FILL BEANS Fill in beans as described in chapter 3.3. The message FILL BEANS will only disappear after drawingoff a coffee. We recommend cleaning the bean containerfrom time to time with a dry cloth before you refill beans. Switch off the machine for this purpose. 13.5 Removing fo...

Page 16 - Decalcifying coffee sector

If a Claris filter cartridge is used, remove it beforehand. 13.10 Regular servicing Regular Jura services ensure your machine’s reliability and longerlife. Keep the original packaging to protect the machine whilebeing transported. 14. Cleaning The machine has an integrated cleaning program. The proc...

Page 17 - Height adjustable coffee-spout

17 COFFEE SECTOR / UNIT DECALCIFYING Inside the machine the decalcifying agent is conducted to thedrip tray. EMPTY TRAY FILL WATER PRESS CALC COFFEE SECTOR / UNIT DECALCIFIYING Inside the machine the water is conducted to the drip tray. EMPTY TRAY / CLEAN CONTACTS (please refer to chapter 13.8) PLEA...

Page 20 - Legal information

20 Problem Cause Action Not enough froth while – Unsuitable milk-type – Use full cream milk frothing up milk – Frothing nozzle blocked – Clean frothing nozzle – Frothing nozzle in wrong position – Draw off steam If the above mentioned problems and/or messages still persist, please contact your deale...

Jura IMPRESSA S70 - Manual

Table of Contents:

Summary

Other Jura Models