Johnson Controls NS8000 Series - Installation Manual
Johnson Controls NS8000 Series Sensor – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Location considerations; adjustment tool
- Page 3 – Installation; Risk of Electric Shock.; Figure 5: Installation of the NS8000 Network Sensor
- Page 5 – Graphical display overview; Figure 6: Temperature screen
- Page 6 – Table 1: Display icons
- Page 8 – Setup and adjustments for the; Adjusting the temperature setpoint
- Page 11 – Repair information
- Page 12 – Technical specifications; Description
- Page 13 – Product warranty; Software terms; set forth at; Patents; Contact information
Vertical Wallbox-Mounted or Surface-Mounted
NS8000 Series Network Sensors Graphical
Display Models Installation Guide
Figure 1: NS8000 Series Network Sensor Graphical Display model
Important (USA, Canada)
The NS Series Network Sensor is intended to provide an
input to equipment under normal operating conditions.
Where failure or malfunction of the network sensor
could lead to personal injury or property damage to
the controlled equipment or other property, additional
precautions must be designed into the control system.
Incorporate and maintain other devices, such as
supervisory or alarm systems or safety or limit controls,
intended to warn of or protect against failure or
malfunction of the network sensor.
Le NS Series Network Sensor est destiné à transmettre
des données entrantes à un équipement dans des
conditions normales de fonctionnement. Lorsqu’une
défaillance ou un dysfonctionnement du network sensor
risque de provoquer des blessures ou d’endommager
l’équipement contrôlé ou un autre équipement, la
conception du système de contrôle doit intégrer des
dispositifs de protection supplémentaires. Veiller dans ce
cas à intégrer de façon permanente d’autres dispositifs,
tels que des systèmes de supervision ou d’alarme, ou des
dispositifs de sécurité ou de limitation, ayant une fonction
d’avertissement ou de protection en cas de défaillance ou
de dysfonctionnement du network sensor.
Software terms
Use of the software that is in (or constitutes) this product
or access to the cloud or hosted services applicable to this
product, if any, is subject to applicable terms set forth at
www.johnsoncontrols.com/techterms
product constitutes an agreement to such terms. If you do
not agree to be bound by such terms, you may return the
unused product to your place of purchase.
Mounting
The NS Series Network Sensor can be surface mounted
or wallbox mounted. For wallbox-mounted installations,
mount the NS Series Network Sensor on a vertically
roughed-in wallbox only. Do not attempt to mount the
sensor on a horizontally roughed-in wallbox.
Note:
Johnson Controls
®
does not supply the
required hardware for mounting.
*241144300006D*
Part No. 24-11443-00006 Rev. D
2021-07-26
NS8000
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Johnson Controls
- Model
- NS8000 Series
- Document type
- Installation Manual
- Category
- Sensor
- Language(s)
- English
- Pages
- 14
- Format
Summary
Location considerations Note: • Locate the network sensor away from steam or water pipes, warm air stacks, unconditioned areas (not heated or cooled), or sources of electrical interference. • Height requirements may vary depending on the site. • Network sensors without CO 2 sensing are shock and vib...
Installation CAUTION Risk of Electric Shock. Disconnect the power supply before making electrical connections to avoid electric shock. ATTENTION Risque de décharge électrique. Débrancher l’alimentation avant de réaliser tout raccordement électrique afin d’éviter tout risque de décharge électrique....
Graphical display overview The following figures show examples of the graphical model display screens. Figure 6: Temperature screen Figure 7: Fan speed screen Figure 8: Settings screen Vertical Wallbox-Mounted or Surface-Mounted NS8000 Series Network Sensors Graphical Display Models Installation Gui...
