JBL SUB150 - Manual

JBL SUB150 Subwoofer – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – Power Cord Connector:; unswitched; suBwooFer rear-Panel controls and connectIons
Page 3 – PlacIng the suBwooFer; amount and quality of bass that is produced.; TV; tO a RECEIVER OR PREaMP/PROCESSOR wIth PREaMP OutPutS
Page 4 – • If your subwoofer always seems too loud or too quiet, you may want; SubwOOFER aDJuStMEntS: PhaSE; sPecIFIcatIons; RCA line-level and LFE inputs; oPeratIng the suBwooFer

Loading the manual

Included Items

Your new JBL

SUB150P 300-watt powered subwoofer incorpo-

rates a 10" (250mm) PolyPlas™ cone transducer and a built-in

high-performance 300-watt (RMS) amplifier that deliver the power-

ful, dynamic and accurate low-frequency performance that makes

your film soundtracks and music come alive. And with line-level

and LFE inputs, adjustable crossover and phase controls and

automatic turn on/off, the SUB150P is also simple to connect and

set up.

We’re confident that this JBL subwoofer will provide every note of

enjoyment that you expect – and that when you think about pur-

chasing additional audio equipment for your home, car or office,

you will once again choose JBL products.

This quick-start guide contains all the information you need to set

up, connect and adjust your new subwoofer. For more in-depth

information, go to our Web site: www.jbl.com.

thank You For choosIng thIs JBl

Product

suB150P

300-Watt, 10" (250mm) Powered Subwoofer

quIck-start guIde

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand: JBL
Model: SUB150
Document type: Manual
Category: Subwoofer
Language(s): English
Pages: 4
Format: PDF

Summary

Page 2 - Power Cord Connector:; unswitched; suBwooFer rear-Panel controls and connectIons

2 Phase Switch: This switch determines whether the subwoofer transduc- er's piston-like action moves in and out in phase with the main speakers. If the subwoofer were to play out of phase with the main speakers, the sound waves from the main speakers could partially cancel out the sound waves from t...

Page 3 - PlacIng the suBwooFer; amount and quality of bass that is produced.; TV; tO a RECEIVER OR PREaMP/PROCESSOR wIth PREaMP OutPutS

3 www.jbl.com E ng lis h PlacIng the suBwooFer connectIng the suBwooFer The performance of a subwoofer is directly related to its placement in the listening room and its physical position relative to the other speakers in the system. While it is true that in general our ears do not hear directional ...

Page 4 - • If your subwoofer always seems too loud or too quiet, you may want; SubwOOFER aDJuStMEntS: PhaSE; sPecIFIcatIons; RCA line-level and LFE inputs; oPeratIng the suBwooFer

tuRnIng thE SubwOOFER On anD OFF Set the subwoofer’s Power Switch to the “On” position. The subwoofer will automatically turn itself on when it receives an audio signal, and it will go into Standby mode after it has received no audio signal for approximately 10 minutes. The subwoofer’s LED will glow...