JBL JBLQUANTUM610BLK - User Manual

- 3 - PRODUCT OVERVIEW Controls on headset 01 02 03 04 10 11 12 13 05 0607 08 09 01 / dial • Balances the chat volume in relation to the game audio volume. 02 Volume +/- dial • Adjusts headset volume. 03 Detachable windshield foam 04 Mic mute / unmute LED • Lights up when the microphone is muted. 05...

- 4 - 07 3.5mm audio jack 08 USB-C port 09 Voice focus boom microphone • Flip up to mute, or flip down to unmute the microphone. 10 Flat-fold ear cup 11 button • Press to mute or unmute the microphone. • Hold for more than 5 seconds to turn the RGB light on or off. 12 Status LED (Power / 2.4G) 13 sl...

- 5 - Controls on 3.5mm audio cable 01 01 02 02 01 slider • Slide to mute or unmute the microphone in 3.5mm audio connection. 02 Volume dial • Adjusts headset volume in 3.5mm audio connection. HP_JBL_Quantum 610_OM_CR_EN_V3.indd 5 HP_JBL_Quantum 610_OM_CR_EN_V3.indd 5 11/26/2021 3:08:35 PM 11/26/202...

- 6 - Getting started Charging your headset 3HR Before use, fully charge your headset through the supplied USB-A to USB-C charging cable. TIPS: • It takes approximately 3 hours to fully charge the headset. • You can also charge your headset through a USB-C to USB-C charging cable (not supplied). HP_...

- 7 - Wearing your headset 1. Put the side marked L onto your left ear and the side marked R onto your right ear. 2. Adjust the earpads and headband for a comfortable fit. 3. Adjust the microphone as necessary. HP_JBL_Quantum 610_OM_CR_EN_V3.indd 7 HP_JBL_Quantum 610_OM_CR_EN_V3.indd 7 11/26/2021 3:...

- 8 - Power on • Slide the power switch upwards to power on the headset. • Slide downwards to power off. The status LED glows solid white upon powering on. First-time setup (for PC only) Download from jblquantum.com/engine to gain full access to features on your JBL Quantum headset - from headset ca...

- 10 - Using your headset With 3.5mm audio connection 1. Connect the black connector to your headset. 2. Connect the orange connector to the 3.5mm headphone jack on your PC, Mac, mobile or gaming console device. Basic operation Controls Operation Volume dial on 3.5mm audio cable Adjust master volume...

- 11 - With 2.4G wireless connection 2.4G 1. Plug the 2.4G USB wireless dongle into a USB-A port on your PC, Mac or PS4/PS5. 2. Power on the headset. It will pair and connect with the dongle automatically. Basic operation Controls Operation Volume dial Adjust master volume. Rotate towards to increas...

- 12 - To pair manually >5S >5S 1. On the headset, slide the power switch upwards and hold for more than 5 seconds until the status LED flashes white. 2. On the 2.4G USB wireless dongle, hold CONNECT for more than 5 seconds until the LED flashes white quickly. Both LEDs on the headset and dong...

- 13 - Product Specifications • Driver size: 50 mm Dynamic drivers • Frequency response: 20 Hz - 20 kHz • Microphone frequency response: 100 Hz -10 kHz • Max input power: 30 mW • Sensitivity: 100 dB SPL @1 kHz / 1 mW • Maximum SPL: 95 dB • Microphone sensitivity: -40 dBV/Pa @1 kHz • Impedance: 32 oh...

- 14 - Troubleshooting If you have problems using this product, check the following points before you request service. No power • The headset turns off automatically after 10 minutes of inactivity. Power on the headset again. • Recharge the headset (see “Charging your headset” ). 2.4G pairing failed...

- 15 - My voice cannot be heard by my teammates • Make sure you have chosen JBL QUANTUM610 WIRELESS CHAT as the default device in the chat sound settings of your PC, Mac or gaming console device. • Make sure the microphone is not muted. I can’t hear myself when I’m talking • Enable sidetone via to h...