JAI CV-A60 - Manual
JAI CV-A60 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – DECLARATION OF CONFORMITY; AS DEFINED BY THE COUNCIL DIRECTIVE; Table of Contents
- Page 3 – Standard Composition
- Page 4 – Camera Housing and Dimensions; Gain potentiometer for manual gain setting.
- Page 5 – Pin configuration is compatible with EIAJ standard; Signal; Parallel with the BNC connector.; Remarks; Configurations
- Page 7 – Functions and Operations; SM
- Page 12 – sec
- Page 13 – Important notes on using this mode:
- Page 19 – Configuring the Camera; Communication setting.; Parameter
- Page 22 – HD/VD input to 75Ohm terminated; , follow these steps
- Page 23 – Specifications
- Page 24 – Spectral Sensitivity; Relative Response; Note 2
- Page 25 – WEN out on pin 6 on 6 pin connector; EEN out
Industrial Monochrome CCD Camera
CV-A50 / CV-A60
Operation Manual
Camera: CV-A50 Revision B
CV-A60 Revision A
Manual: Version 2.1
A50Manualjul14.doc
JPT 14-07-03
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
CV-A50 / CV-A60 DECLARATION OF CONFORMITY AS DEFINED BY THE COUNCIL DIRECTIVE 89/336/EEC EMC (ELECTROMAGNETIC COMPABILITY) WE HEREWITH DECLARE THAT THIS PRODUCT COMPLIES WITH THE FOLOWING PROVISIONS APPLYING TO IT. EN-50081-1 EN-50082-1 Table of Contents 1. General......................................
CV-A50 / CV-A60 1. General The difference from the previous manual is that the CCD sensor in CV-A50 is changed to new types. Now the used CCD sensors are: ICX-408AL-6, 409AL-6, 418ALL-6, 419ALL-6. The CV-A50/A60 is a range of monochrome CCIR and EIA interlaced 1/2” and 1/3” CCD cameras, designed for...
CV-A50 / CV-A60 4. Camera Housing and Dimensions Fig. 1. Locations and dimensions. 1. 12 pin Hirose connector for frame grabber interfacing and power (12V DC). 2. BNC connector for video output. VS 1.0 Vpp 75 Ohm. 3. 6 pin Hirose connector for trigger input and RS-232C control interface. 4. Gain pot...