Intel SC450NX - Manual

Intel SC450NX

Intel SC450NX – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
Page: / 24

Table of Contents:

  • Page 5 – Safety Guidelines; Before you remove a server cover, observe these safety guidelines:; Server Precautions; WARNINGS; front panel of the server
  • Page 6 – CAUTIONS; ESD; ESD can; Boards and modules can be extremely; Operating the server with the covers
  • Page 7 – Equipment Rack Precautions; : The operating temperature of the server, when installed in an
  • Page 9 – Contents
  • Page 11 – Introduction; This guide explains three processes:
  • Page 12 – Tools You Need; Pencil
  • Page 13 – Configuring for Rack Mount; Before starting, please read “Safety Guidelines” on page v.; Prepare the Slide Assemblies; Remove the slide assemblies from the kit.
  • Page 14 – Prepare the Server; Attaching the Bezel Frame and Door; WARNING; : To avoid personal injury when unpacking the server, use; Use four screws from the kit to attach the handles to the chassis.
  • Page 15 – Attach the Small Bar of the Slide Assembly to the Server; Remove four screws from the kit.
  • Page 16 – Prepare the Equipment Rack; NOTE
  • Page 18 – Install the Server in the Rack; : The equipment rack must be anchored; : To avoid personal injury when unpacking the server, use; Connect all external cables and the power cord(s) to the server.
  • Page 21 – Configuring for Pedestal Mount; Install Chassis Feet; Remove two system feet and two screws from the kit.; Install the Top and Side Covers; Observe the safety guidelines on page v.
  • Page 22 – Install Bezel Frame and Door
  • Page 23 – Changing from Pedestal to Rack; Remove and save the single screw from the back of the TOP cover.
  • Page 24 – Exchange the Bezel Frame; Reattach the bezel door to its hinges on the chassis.
Loading the manual

SC450NX MP Server
Rack/Pedestal Kit
Installation Guide

Order Number: 711917-001a

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 5 - Safety Guidelines; Before you remove a server cover, observe these safety guidelines:; Server Precautions; WARNINGS; front panel of the server

v Safety Guidelines Before you remove a server cover, observe these safety guidelines: • Only technically qualified personnel should integrate the server. • Turn off all peripheral devices connected to the server. • Turn off the server using the push-button on/off power switch on the front panel of ...

Page 6 - CAUTIONS; ESD; ESD can; Boards and modules can be extremely; Operating the server with the covers

vi CAUTIONS E LECTROSTATIC DISCHARGE (ESD) AND ESD PROTECTION : ESD can damage disk drives, add-in boards, and other components. This server canwithstand normal levels of environmental ESD while hot-swapping SCSI harddisk drives. However, we recommend doing all procedures in this manualonly at an ES...

Page 7 - Equipment Rack Precautions; : The operating temperature of the server, when installed in an

vii Equipment Rack Precautions WARNINGS A NCHOR THE EQUIPMENT RACK : The equipment rack must be anchored to an unmovable support to prevent it from falling over when one or moreservers are extended in front of it on slide assemblies. The anchors mustbe able to withstand a force of up to 113 kg (250 ...

Other Intel Models

All Intel Other