Intel X18-M - Manual
Intel X18-M – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Ordering Information; Decoder
- Page 3 – Contents
- Page 5 – Introduction; The Intel; Product Overview; hard drives based on the SATA interface standard.
- Page 6 – flash memory devices on multiple channels internally.; Certifications; Block Diagram; Intel; SATA Interface; Flash Memory
- Page 7 – Product Specifications; Capacity; User Addressable Sectors
- Page 8 – Electrical Characteristics; Supply Voltage; Latency Specifications
- Page 9 – Environmental Conditions; Temperature; Temperature Related Specifications
- Page 10 – Electromagnetic Immunity; defined in the following table:; Reliability; Nonrecoverable Read Errors; is not returned to the host.; Radio Frequency Specifications
- Page 11 – Mean Time Between Failure; Mechanical Information
- Page 12 – Dimensions for Intel X18-M SATA SSD 1.8” 5 mm Form Factor
- Page 13 – Dimensions for Intel X25-M SATA SSD 2.5” 7 mm Form Factor
- Page 15 – Pin and Signal Descriptions; Pin Locations; Layout of Signal and Power Segment Pins; Signal Segment S1
- Page 16 – Signal Description Table
- Page 17 – Serial ATA Power Pin Definitions for 1.8” Form Factor (Continued)
- Page 18 – Hot Plug Support; detection by a host system without hardware device detection.; Command Sets; ATA Commands; ATA General Feature Command Set
- Page 19 – IDENTIFY DEVICE Data; Returned Sector Data
- Page 21 – Power Management Command Set; which consists of; Security Mode Feature Set; consists of
- Page 22 – SMART Command Set
- Page 23 – 8-Bit Address Command Set; Device Configuration Overlay Command Set; set, which consists of; General Purpose Log Command Set; SATA Commands; features that are unique to the SATA specification.; Software Settings Preservation; disable the preservation of software settings.
- Page 24 – Native Command Queuing; command set, which consists of; References; Standards References
- Page 25 – Terms and Acronyms; following list to define a variety of terms and acronyms.; Glossary of Terms and Acronyms
- Page 26 – Revision History; Glossary of Terms and Acronyms (Continued)
Order Number: 319765-002US
July 2008
Intel
®
X18-M/X25-M SATA Solid State Drive
SSDSA1MH080G1, SSDSA2MH080G1
Advance Product Manual
Available in 1.8” and 2.5” Form Factors
Capacity: 80 GB
Uses Intel NAND flash memory Multi-Level Cell
(MLC) components
Bandwidth Performance Specifications
— Sustained Sequential Read: Upto 250 MB/s
— Sustained Sequential Write: Upto 70 MB/s
PCMark* Vantage Benchmark HDD Score:
20,000
Compatibility
— Intel
®
Matrix Storage Manager
— SATA Revision 2.6 compliant, compatible
with SATA 1.5 Gb/s and 3 Gb/s interface
rates
— ATA/ATAPI-7 Compliant
— SSD Enhanced SMART ATA feature set
— Native Command Queuing (NCQ) command
set
Certifications
— UL*
— CE*
— C-Tick*
— BSMI*
— MIC*
— Microsoft* WHQL
— RoHS*
Power Management
— 3.3 V (1.8”) or 5 V (2.5”) SATA Supply Rail
— Supports ATA Power Management and
Advanced Power Management Specifications
— SATA Interface Power Management
— OS-Aware Hot Plug/Removal
Power Specifications
— Active: 0.150 W TYP
— Idle: 0.060 W TYP
Temperature
— Operating: 0
o
C to 70
o
C
— Non-Operating: -55
o
C to 95
o
C
Reliability
— Read Error Rate (BER): 1 sector per 10
15
bits read
— Mean Time Between Failures (MTBF)
1,200,000 hours
— Endurance Management Feature enables
five years minimal useful life
Shock
— Operating and Non-operating: 1,000G/0.5
msec
Vibration
— Operating: 2.17 G (7-800 Hz)
— Non-operating 3.13 G (10-500 Hz)
Weight
— 1.8” 5 mm Form Factor: 35 +/-2 grams
— 2.5” 7 mm Form Factor: 80+/-2 grams
— 2.5” 9.5 mm Form Factor: 86 +/-2 grams
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Intel ® X18-M/X25-M SATA Solid State Drive Advance Product Manual July 2008 2 Order Number: 319765-002US L Ordering Information INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS I...
Intel ® X18-M/X25-M SATA Solid State Drive July 2008 Advance Product Manual Order Number: 319765-002US 3 Intel ® X18-M/X25-M SATA SSD Contents 1.0 Introduction .............................................................................................................. 51.1 Product Overview ..........
Intel ® X18-M/X25-M SATA Solid State Drive July 2008 Advance Product Manual Order Number: 319765-002US 5 Intel ® X18-M/X25-M SATA SSD 1.0 Introduction The Intel ® X18-M/X25-M SATA Solid State Drive (SSD) delivers leading performance in industry standard 1.8” and 2.5” form factors while simultaneousl...
