INSTEON 2475D - Manual
INSTEON 2475D – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – In-LineLinc Dimmer – Features and Benefits; Features
- Page 4 – Quick Start Guide; Preparing to Install In-LineLinc; Tools Needed; Flathead screwdriver; Installing In-LineLinc
- Page 5 – The load will turn on and off.; Using In-LineLinc Dimmer; Button Functions; An Important Note About INSTEON Networks; dual-band INSTEON products
- Page 6 – Linking In-LineLinc Dimmer as an INSTEON Responder; for 3 seconds or the On/scene button for 10 seconds.; Unlinking In-LineLinc Dimmer as an INSTEON Responder; for 3 seconds; Advanced Features; Setting the Local On-Level; The load connected to In-LineLinc will turn on at the local on-level.; Setting the Ramp Rate
- Page 7 – Brightness Level; In-LineLinc’s status LED will blink; Creating INSTEON Scenes
- Page 8 – Factory Reset; Additional Resources
- Page 9 – Specifications
- Page 10 – Troubleshooting; Problem
- Page 11 – Adding
- Page 13 – Certification and Warranty
Page 1 of 13
2475D - Rev: 1/21/2014 7:17 AM
In-LineLinc™ Dimmer
INSTEON
®
Remote Control In-Line Dimmer
Owner’s Manual (rev 5.1+)
(#
2475D
)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 3 of 13 2475D - Rev: 1/21/2014 7:17 AM In-LineLinc Dimmer – Features and Benefits Congratulations on purchasing the high-quality INSTEON In-LineLinc Dimmer Switch. With this easy-install module, you can add conveniently hidden, fully-dimmable remote control to not only the lights wired to In-Li...
Page 4 of 13 Rev: 1/21/2014 7:17 AM What’s in the Box? - In-LineLinc Dimmer - Quick Start Guide - Two (2) mounting screws - Three (3) wire nuts Preparing to Install In-LineLinc CAUTIONS AND WARNINGS Read and understand these instructions before installing and retain them for future reference. This p...
Page 5 of 13 Rev: 1/21/2014 7:17 AM 6) Referring to the diagram at right and the table below, use the included wire nuts to connect the fixture’s Line, Load, Neutral and Ground wires to In-LineLinc’s corresponding wires. 7) Enable power to the switch from the circuit breaker or fuse panel. 8) Use In...
