Ingersoll Rand PE10P-AXS-XXX-A0S - Manual
Ingersoll Rand PE10P-AXS-XXX-A0S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OPERATING AND SAFETY PRECAUTIONS
- Page 3 – Verify correct model / configuration prior to installation.
- Page 4 – SEAT OPTIONS; Service Kit; COMMON PARTS
- Page 5 – LUBRICATION / SEALANTS; Torque Sequence
- Page 6 – AIR MOTOR PARTS; AIR MOTOR SECTION SERVICE; Air Motor Section Service is continued from Fluid Section repair.; AIR MOTOR SECTION DISASSEMBLY
- Page 7 – Figure 3; TROUBLE SHOOTING; Product discharged from exhaust outlet.
- Page 8 – Figure 4; DIMENSIONS; DIMENSIONAL DATA
E
2010
CCN 15214158
(800)
D
)$;
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET -- BRYAN, OHIO 43506
1” DIAPHRAGM PUMP
OPERATOR’S MANUAL
PE10P-X-X-A0S
RELEASED:
9-14-04
REVISED:
(REV.
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
1:1 RATIO (NON-METALLIC)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Refer to Model Description Chart to match the pump material options.
637396-XX for fluid section repair (see page 4). NOTE: This kit also con-
tains several air motor seals which will need to be replaced.
637412 for air section repair (see page 6).
PUMP DATA
Models
see Model Description Chart for “-XXX”.
. . . . . . . . . .
Pump Type
Non-Metallic Air Operated Double Diaphragm
. . . . . . .
Material
see Model Description Chart.
. . . . . . . . . .
Weight
PE10P-AKS-XXX-A0S
25.40 lbs (11.52 kgs)
. . .
. . .
PE10P-APS-XXX-A0S
18.92 lbs (8.58 kgs)
. . .
PE10P-BKS-XXX-A0S
25.40 lbs (11.52 kgs)
. . .
PE10P-BPS-XXX-A0S
18.92 lbs (8.58 kgs)
. . .
PE10P-FKS-XXX-A0S
26.72 lbs (12.12 kgs)
. . .
PE10P-FPS-XXX-A0S
19.44 lbs (8.82 kgs)
. . .
PE10P-YKS-XXX-A0S
26.29 lbs (11.93 kgs)
. . .
PE10P-YPS-XXX-A0S
19.16 lbs (8.69 kgs)
. . .
Maximum Air Inlet Pressure
120 p.s.i.g. (8.3 bar)
. . . . . . . . .
Maximum Material Inlet Pressure
10 p.s.i.g. (0.69 bar)
. . . . .
Maximum Outlet Pressure
120 p.s.i.g. (8.3 bar)
. . . . . . . . . .
Maximum Flow Rate
(
flooded inlet
)
53.0 g.p.m. (200.6 l.p.m.)
. . . .
Displacement / Cycle @ 100 p.s.i.g.
0.226 gal. (0.86 lit.)
. . .
Maximum Particle Size
1/8” dia. (3.2 mm)
. . . . . . . . . . . .
Maximum Temperature Limits (diaphragm / ball / seal material)
E.P.R. / EPDM
-60
_
to 280
_
F (-51
_
to 138
_
C)
. . . . . . . . . . .
Hytrel
R
-20
_
to 150
_
F (-29
_
to 66
_
C)
. . . . . . . . . . . . . . . .
Nitrile
10
_
to 180
_
F (-12
_
to 82
_
C)
. . . . . . . . . . . . . . . . .
Polypropylene
35
_
to 1
75
_
F ( 2
_
to
79
_
C)
. . . . . . . . . . .
PVDF (Kynar
R
)
10
_
to 200
_
F (-12
_
to 93
_
C)
. . . . . . . . . .
Santoprene
R
-40
_
to 225
_
F (-40
_
to 107
_
C)
. . . . . . . . . . .
PTFE
40
_
to 225
_
F (4
_
to 107
_
C)
. . . . . . . . . . . . . . . . .
Viton
R
-40
_
to 350
_
F (-40
_
to 177
_
C)
. . . . . . . . . . . . . . . .
Dimensional Data
see page 8
. . . . . . . . . . . . . . . .
Mounting Dimension
5.032” x 10.050” (127.8 mm x 255.3 mm)
. . .
Noise Level
@ 70 p.s.i., 60 c.p.m.
79.7 db(A)
{
. . . . .
The pump sound pressure levels published here have been updated to an Equivalent
Continuous Sound Level (L
Aeq
) to meet the intent of ANSI S1.13-1971, CAGI-PNEU-
ROP S5.1 using four microphone locations.
NOTICE: All possible options are shown in the chart, however, certain
combinations may not be recommended, consult a representative or the
factory if you have questions concerning availability
.
PE10P-AXS-XXX-A0S
PE10P-BXS-XXX-A0S
PE10P-YXS-XXX-A0S
PE10P-FXS-XXX-A0S
Figure 1
MODEL DESCRIPTION CHART
PE10 P - X X S - X X X - A0S
PE10P - XXS - X X X - A0S
637396 - X X
Diaphragm
Ball
FLUID SECTION SERVICE KIT SELECTION
EXAMPLE: MODEL # PE10P-FPS-PAA-A0S
FLUID SECTION SERVICE KIT # 637396-AA
Seat Material
H - Hard 440 Stainless Steel
K - PVDF (Kynar)
P - Polypropylene
S - 316 Stainless Steel
Diaphragm Material
A - Santoprene
M - Medical Grade Santoprene
C - Hytrel
T - PTFE / Santoprene
G - Nitrile
V - Viton
Hardware Material
S - Stainless Steel
Fluid Caps & Manifold Material
K - PVDF (Kynar)
P - Polypropylene
Fluid Connection / Location
A - 1 --11-1/2 N.P.T.F. - 1
B - Rp 1 - 11 BS
F - 1” A.N.S.I. / DIN Flange / End
Y - 1” A.N.S.I. / DIN Flange / Center
Center Section Material
P - Polypropylene
Ball Material
A - Santoprene
T - PTFE
C - Hytrel
V - Viton
G - Nitrile
www.ingersollrandproducts.com
11-1
5
-10
08
)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PE10P-X-X-A0S Page 2 of 8 OPERATING AND SAFETY PRECAUTIONS READ, UNDERSTAND, AND FOLLOW THIS INFORMATION TO AVOID INJURY AND PROPERTY DAMAGE. EXCESSIVE AIR PRESSURESTATIC SPARK HAZARDOUS MATERIALSHAZARDOUS PRESSURE WARNING EXCESSIVE AIR PRESSURE. Can cause person- al injury, pump damage or property ...
Page 3 of 8 PE10P-X-X-A0S GENERAL DESCRIPTION The ARO diaphragm pump offers high volume delivery even at low airpressure and a broad range of material compatibility options available.Refer to the model and option chart. ARO pumps feature stall resistantdesign, modular air motor / fluid sections.Air ...
MATERIAL CODE [B] = Nitrile [C] = Carbon Steel [E] = E.P.R. [H] = Hytrel [K] = PVDF (Kynar) [MSP]= Medical Grade Santoprene[P] = Polypropylene [SH] = Hard Stainless Steel[SP] = Santoprene[SS] = Stainless Steel[T] = PTFE [V] = Viton PE10P-X-X-A0S Page 4 of 8 PARTS LIST / PE10P-X-X-A0S FLUID SECTION F...
