Hunter 99127 - Manual

www.HunterFan.com

1.866.268.1936

Model 99127

Universal 3 Speed

Ceiling Fan Remote

Installation

Wiring

OR

OR

OR

Remove the canopy. If uncertain
how to remove it, reference the fan’s
owner’s manual. With wiring exposed,
it may be helpful to note existing wire
connections or take a digital photo for
reference. Remove the wire connectors
that connect the wires from the outlet
box to the fan, leaving the grounding
wires connected.

CONNECT WIRES FROM RECEIVER TO FAN -

Using the blue wire connectors connect the white wire from the receiver

(marked “common out”) to the white wire from fan. Connect the black wire from the receiver (marked “fan out”) to the
black wire from the fan. Connect the blue wire from the receiver (marked ”light out”) to the blue wire (or possibly black
with white stripe) from the fan.

If you’re uncertain about wire colors or connections, please contact a qualified electrician.

CONNECT WIRES FROM RECEIVER TO WIRES FROM OUTLET BOX

- Using an orange wire connector connect

the black wire (ungrounded) from the ceiling to the black wire from the receiver (marked “live in”). Connect
the white wire (grounded) from the ceiling to the white wire from the receiver (marked “neutral in”).

AFTER ALL WIRES ARE CONNECTED

and secured with wire connectors, re-install the canopy.

Before installing the
Universal Remote Control
Receiver, use the pull chains
to set the fan speed to HIGH
and the light to ON. Be
sure power is OFF before
proceeding with installation.

Choose the hanging system that most closely resembles the one used by your fan and install the receiver as shown and wire as directed.

Note:

Some fans may have considerable excess lead wire. For easier canopy installation, cut the excess wire, leaving a minimum of 8” remaining. Re-strip the fan lead wires 1/2”. Place remaining excess

wire into the ceiling electrical box.

The bracket and fan must remain properly grounded.

You may have installation issues if the fan is installed on an angled ceiling. For assistance, call 1-866-268-1936.

Ceiling

Plate

Receiver

Canopy

Receiver

Canopy

Ceiling

Bracket

Receiver

Fan Body

Cable Tie

For low profile fans, the receiver should

be secured to the ceiling bracket with a

cable tie.

Receiver

Canopy

Turn the splices upward and push them carefully back through the hanger bracket

into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

To avoid possible electrical shock, before installing or servicing your fan, disconnect

the power by turning off the circuit breakers to the outlet box and associated wall switch
location. If you cannot lock the circuit breakers in the off position, securely fasten a

prominent warning device, such as a tag, to the service panel.

FR

OM R

ECEIVER

FRO

M CEILING

black (live in)

white (neutral in)

white (grounded)

black (ungrounded)

FR

OM RECEIVER

white

black

blue

white (common out)

black (fan out)

blue (light out)

FROM FAN

M0077-01 • 07/26/13 • © Hunter Fan Company

Turn

Pow

er

OFF