HP SN3000B - Manual
This Installation Manual covers the setup of HP SN3000B and SN6000B 16Gb Fibre Channel (FC) switches, including rack-mount procedures, environmental requirements, and basic hardware assembly. The document outlines essential components like cables, power supplies, and mounting kits while emphasizing proper airflow orientation and cable management for optimal performance. It also addresses initial configuration steps such as serial console setup, IP addressing, and time synchronization before deployment.
Table of Contents:
- Page 1 – Quick Start Instructions for Fibre Channel Switches
- Page 2 – Installation Requirements and Environmental Specifications
- Page 3 – Rack Installation Procedures with Rack Mount Kit
- Page 4 – Assembling and Mounting Switch Components in a Rack
- Page 5 – Standalone Switch Setup and Initial Configuration
- Page 6 – Switch Configuration via Serial Console
- Page 7 – Time Synchronization and SFP+ Transceiver Installation
- Page 8 – Fibre Channel Cable Connection and Verification
HP B-series 16Gb FC Switches
Quick Start Instructions
© Copyright 2012 Hewlett-Packard Development Company, L.P.
Printed in the U.S.
*5697-1520*
HP Part Number: 5697-1520
Published: March 2012
Edition: 1
Overview
Read these instructions to set up and configure the HP
SN6000B 16Gb 48-port Fibre Channel Switch and
HP SN3000B 16Gb 24-port Fibre Channel Switch.
These instructions provide basic configuration steps.
For detailed rack mount and configuration instructions,
download the HP B-series 16Gb Switches Hardware
Reference Guide from the
storage
section of the HP
website:
http://www.hp.com/support/manuals
shows the port side of the 48-port
switch.
SN6000B 16Gb 48-port FC switch
Figure 1 Port side of the 48-port FC Switch
6. FC ports (44-47)
1. System status LED
7. FC ports (4-7)
2. Management Ethernet port
with LEDs
8. Switch ID pull-out tab
3. USB port
9. Serial console port
4. FC ports (0-3)
10. System power LED
5. FC ports (40-43)
Verify the SN6000B 16Gb 48-port FC
switch carton contents
Verify that the carton contains the following (any SFPs
ordered will not be in this carton; they will be
packaged separately):
•
One HP SN6000B 16Gb 48-port FC Switch with
two integrated power supply/fan assemblies
•
Rubber feet, required to set up the switch as a
standalone unit
•
Serial cable with an RJ-45 connector plus an
adaptor for RJ-45 to DB9
•
HP SAN Network Advisor DVD
•
Brocade EZ Switch and China ROHS
documentation
Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- HP
- Model
- SN3000B
- Document type
- Manual
- Language(s)
- English
- Pages
- 8
- File size
- 486.6 KB
- Format
Summary
Overview and quick start procedures for HP B-series 16Gb FC Switches, including diagrams labeling ports and components for the 48-port and 24-port models, along with a carton contents checklist.
Details regarding installation requirements, included contents such as terminal emulators and cables, environmental limits for temperature and humidity, and diagrams labeling switch ports and LEDs.
Instructions for mounting HP SN6000B and SN3000B switches in a rack using the Rack Mount Kit, electrical setup requirements, proper orientation for airflow, and procedures for attaching rails and mounting brackets.
