HP SL160Z - Manual
HP SL160Z – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – QuickSpecs; Overview
- Page 4 – Processor; depend on the quantity and type of DIMMs installed.; Upgradeability; Upgradeable to two processors; Chipset; All processor models except for those identified below.; Memory Protection; Advanced memory protection; Standard Features
- Page 6 – In order to connect a USB device internally, the internal USB; Graphics; Can support two SL160z server trays in the 2U chassis.
- Page 8 – Security; For more information about TPM, including a white paper, go to:; Server Power Cords
- Page 9 – Power Supply; or; Common Slot ProLiant; for; System Fans; system fans ship standard in z6000 chassis
- Page 10 – adequate airflow and to prevent damage to the equipment:; Rack Support; 0U bulk rail kit - Used to fit in HP 10000 series racks
- Page 12 – PCI-Express Generation 2 adapters; Gigabit Ethernet; Use embedded ports; HPC Interconnects
- Page 13 – HP ProLiant SL160z G6 Server; Rail Kits; HP 460W CS HE Power Supply Kit; Processors; Configuration Information - Factory Integrated Models
- Page 14 – Memory; Maximum 12 DIMMs supported per node.
- Page 15 – Hard Drive; The hard drives use a quick release carrier.; Step 3: Choose Additional Options for Factory Integration
- Page 16 – DDR3 speed is the maximum memory speed of the processor. Actual; Core Options
- Page 17 – Hard Drives; Communications
- Page 18 – Redundant Options; In ProLiant Servers that have more than one power slot (bay), only
- Page 19 – Additional Options
- Page 20 – Rail Options; 0U rail kit used for HP racks ONLY - allows addition of five z6000; The following is a list of all Fibre Channel Host Bus Adapters for; StorageWorks SCSI HBA; Recommended HBA for MSL SCSI Tape Library connect.
- Page 23 – Charts do not represent all possible memory configurations.; DDR3 memory population guidelines
- Page 24 – Standard memory configuration (1 CPU model); population order; Standard memory plus optional memory (1 CPU model)
- Page 25 – UDIMM maximum configuration (1 CPU model)
- Page 26 – UDIMM maximum configuration (2 CPU model)
- Page 28 – Drive Support; the HBA or Controller technical specifications for details.; Storage
- Page 29 – Power Specifications
- Page 30 – Power Factor
- Page 31 – Technical Specifications
- Page 32 – FCC Rating
Open View:
Rear View:
1.
18 DDRs DIMM slots
1.
Serial Port
2.
Up to two Intel® Quad-Core 5500 sequence processors 2.
Video Port
3.
Two 3.5" non-hot plug hard drives using a quick release
drive carrier
3.
(2) USB Ports
4.
(2) 1Gbit NIC
5.
Optional Dedicated Management port
6.
UID
7.
Optional low profile x16 PCI-e Gen 2
8.
Power Button
9.
Health LED
At A Glance
The HP ProLiant SL160z G6 server is part of a new family, HP ProLiant SL6000, of HP server solutions optimized for scale-
out customers to greatly reduce costs, maximize power efficiency, by sharing power supplies and fans, and maintain total
flexibility.
Two independent HP ProLiant SL160z G6 Servers go into the 2U HP ProLiant z6000 G6 Chassis. The HP ProLiant SL160z
G6 Server is a two socket Intel server with 18 DDR3 DIMM sockets and support for a low profile x16 PCI-e Gen 2 and an
internal x4 PCI-e Gen 2 slot.
The HP ProLiant SL160z G6 is optimized for applications needing large amounts of memory and I/O expansion.
Processors
:
Supports up to two Intel® Quad-Core 5500 sequence processors
Quad-Core Intel® Xeon® processors 5500 sequence with 4MB or 8 MB Level 3 cache (depends on model)
Intel® 5520 Chipset
Memory
:
Up to 144GB, using PC3-8500R DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated
at 3 DIMMs per Channel in 18 slots.
Up to 24GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully
populated at 2 DIMMs per Channel in 12 slots.
Internal Drive Support
:
Support for up to two 3.5" non-hot plug Serial ATA (SATA) hard drives using a quick release drive carrier
Internal storage capacity of up to 2.0TB (2 x 1TB 3.5" SATA)
Network Controller
:
HP NC362i Integrated Dual Port Gigabit Server Adapter
Storage Controllers
:
Non-Hot Plug SATA Models: HP Embedded SATA RAID Controller (RAID 0, 1, 10)
NOTE:
Transfer rate: up to 3 Gb/s SATA
Expansion Slots
:
Up to two available PCI Express 2.0 slots:
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Overview
DA - 13385 Worldwide QuickSpecs — Version 1 — 6.15.2009
Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Standard Slot 1: low-profile x16 PCI-Express 2.0Optional Slot 2: low-profile internal only x4 PCI-Express 2.0 Management : HP ProLiant Onboard Administrator Powered by Lights-Out 100 with optional LO100i Advanced Licenses forVirtual KVM and Virtual MediaThe HP ProLiant Easy Set-up CDs and ISO image ...
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor One of the followingdepending on Model Quad-Core Processors Intel® Xeon® Processor X5570 (2.93 GHz, 8MB L3 Cache, 95W,...
Storage Optical Drives DVD-ROM / DVD RW drives via USB only Diskette Drives Via USB only Drive Bays None ship standard Up to 2 Non-hot plug SATA 3.5" drives Maximum InternalStorage Non-Hot Plug SATA 2.0TB 2 x 1TB Interfaces Parallel None Network RJ-45 2 10/100/1000 NIC ports (plus 1 optional ded...