Page 3 - Contents; Network setup; Co
Contents 1 HP All-in-One overview The HP All-in-One at a glance....................................................................................................2Control panel features................................................................................................................3F...
Page 5 - HP A
Label Description 8 Front USB port 9 Wireless network indicator and Bluetooth light 10 LightScribe CD/DVD drive 11 Memory card slots and Photo light 12 Glass 13 Slide and Negative Film holder 14 Slide and Negative Film light 15 Lid 16 Lid backing 17 Slide and Negative Film light power port 18 Ethern...
Page 6 - Find more information; Setup Guide; “Troubleshooting and support” on page 29; Onscreen Help; Use the Roxio Creator Basic Software; verview
Label Name and Description 1 Display : The touch screen display shows menus, photos, and messages. The control panel can be pulled up and angled for better viewing of this display. 2 Red Eye Removal : Turns the Red Eye Removal feature On or Off. By default, this feature is turned off. When the featu...
Page 7 - not both at the same time.; Wired network setup; twork setu
2 Network setup This section describes how to connect the HP All-in-One to a network and how to viewand manage network settings. If you want to: See this section: Connect to a wired (Ethernet) network. “Wired network setup” on page 5 Connect to a wireless network with a wirelessrouter (infrastructur...
Page 8 - What you need for a wired network; A desktop computer or laptop with an Ethernet connection.; etwork set
To set up the HP All-in-One on a wirednetwork, you need to do the following: See this section: First, collect all of the required materials. “What you need for a wired network”on page 6 Next, connect to a wired network. “Connect the HP All-in-One to the network”on page 7 Finally, install the softwar...
Page 9 - To connect the HP All-in-One to the network; “Install the software for a network connection” on page 14; infrastructure
Connect the HP All-in-One to the network To connect the HP All-in-One to the network, use the Ethernet port on the back of thedevice. To connect the HP All-in-One to the network 1. Remove the yellow plug from the back of the HP All-in-One. 2. Connect the Ethernet cable to the Ethernet port on the ba...
Page 10 - What you need for an integrated wireless WLAN 802.11 network
The advantages of a wireless infrastructure network as compared to an ad hoc networkinclude: • Advanced network security • Enhanced reliability • Network flexibility • Better performance, especially with 802.11 g mode • Shared Broadband Internet access To set up the HP All-in-One on an integratedwir...
Page 12 - Wireless ad hoc network setup
c . When you have finished entering the new network name, touch Done , and then touch OK . If the HP All-in-One is unable to discover the network based on the network nameyou entered, you will be prompted to answer additional questions about yournetwork, as described in steps d and e. Before continu...
Page 13 - What you need for an ad hoc network; To create a network profile; The HP All-in-One comes configured with a network profile with; hpsetup; as
NOTE: An ad hoc connection is available if you do not have a wireless router or access point. However, it provides little flexibility, a low level of network security, andslower network performance than with a wireless router or access point. In order to connect the HP All-in-One to your computer (a...
Page 14 - Create a network profile for other operating systems
1. In the Control Panel , double-click Network Connections . 2. On the Network Connections window, right-click the Wireless Network Connection . If you see Enable on the pop-up menu, select it. Otherwise, if you see Disable on the menu, the wireless connection is already enabled. 3. Right-click the ...
Page 15 - Connect to a wireless ad hoc network
Using the LAN card configuration program, create a network profile that has the followingvalues: • Network name (SSID) : Mynetwork (example only) NOTE: You should create a network name that is unique and easy for you to remember. Just remember that the network name is case-sensitive. Therefore,you m...
Page 16 - Install the software for a network connection
6. If prompted, enter your WEP key as follows. Otherwise go to step 7. a . Touch the appropriate letters or numbers on the visual keyboard. NOTE: You must enter the exact uppercase (capital) and lowercase (small) letters. Otherwise, the wireless connection will fail. b . When you are finished enteri...
Page 18 - Manage your network settings; Change basic network settings from the control panel; Use the Wireless Setup Wizard
For more detailed instructions on connecting the HP All-in-One to a network, see: • “Wired network setup” on page 5 • “Integrated wireless WLAN 802.11 network setup” on page 7 • “Wireless ad hoc network setup” on page 10 Manage your network settings You can manage network settings for the HP All-in-...
Page 20 - Change IP settings
Change IP settings The default setting for the IP settings is Automatic , which sets the IP settings automatically. However, if you are an advanced user, you might want to manually changethe IP address, subnet mask, or the default gateway. To see the IP address and subnetmask of the HP All-in-One, p...
Page 21 - Load originals and load paper; Load originals; To load an original on the scanner glass; Us
3 Use the HP All-in-One features This chapter includes information about how to use the HP All-in-One for basicoperations. In addition, it provides instructions about how to load paper, view and selectphotos, save photos to CD/DVDs, label the CD/DVDs, and replace the ink cartridges. Load originals a...
Page 22 - se th
2. Tap a stack of paper on a flat surface to align the edges, and then check the paperfor the following:• Make sure it is free of rips, dust, wrinkles, and curled or bent edges. • Make sure all the paper in the stack is the same size and type. 3. Insert the stack of paper into the main input tray wi...
Page 23 - To load up to 10 x 15 cm (4 x 6 inch) photo paper in the photo tray; Raise the output tray, and then pull out the photo tray.
5. Push the main input tray back into the HP All-in-One. 6. Pull the output tray extender toward you, as far as it will go. NOTE: When you use legal-size paper, leave the tray extender closed. Load 10 x 15 cm (4 x 6 inch) photo paper You can load up to 10 x 15 cm (4 x 6 inch) photo paper into the ph...
Page 24 - Avoid paper jams; To help avoid paper jams, follow these guidelines.
Avoid paper jams To help avoid paper jams, follow these guidelines. • Remove printed papers from the output tray frequently. • Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag. • Ensure that paper loaded in the input tray lays flat and the edges are not bent or t...
Page 26 - Scan an image; Scan an original to a computer
2. Insert a memory card into the appropriate slot on the HP All-in-One, or connect astorage device to the front USB port.The Photosmart Express menu appears, with the most recent photo shown on the display. 3. Touch Save . The Save Photos menu appears. 4. Touch Save to CD/DVD . When the photos have ...
Page 27 - Scan an original to a memory card or storage device
To scan to a computer 1. Load your original print side down on the right front corner of the glass. 2. Touch Scan . The Scan Menu appears. 3. Touch Scan to Computer . 4. If the HP All-in-One is connected directly to a computer with a USB cable, proceedto step 6. 5. If the HP All-in-One is connected ...
Page 29 - Pull the ink cartridge toward you out of its slot to remove it.
3. Squeeze the bottom of the latch below the ink cartridge you want to replace, and thenlift the latch.If you are replacing the black ink cartridge, lift the latch on the far left.If you are replacing one of the five color ink cartridges, such as yellow, light cyan(blue), cyan, light magenta (pink),...
Page 31 - Uninstall and reinstall the software
4 Troubleshooting and support This chapter contains troubleshooting information for the HP All-in-One. Specific information isprovided for installation and configuration issues, and some operational topics. For moretroubleshooting information, see the onscreen Help that came with your software.This ...
Page 32 - my computer
Solution • Make sure the power cord is firmly connected to both the HP All-in-One and the poweradapter. Plug the power cord into a power outlet, surge protector, or power strip. 1 Power connection 2 Power cord and adapter 3 Power outlet • If you are using a power strip, make sure the power strip is ...
Page 33 - Wired network setup troubleshooting
computer and the other into the back of the HP All-in-One. You can connect to any USB port onthe back of your computer. For more information on installing the software and connecting the USB cable, see the SetupGuide that came with the HP All-in-One. The HP All-in-One does not print Cause: The HP Al...
Page 34 - The Printer not Found screen appears during installation
Solution: Check the following cables to ensure they are connected properly. • Cables between the HP All-in-One and the hub or router • Cables between the hub or router and your computer • Cables to and from your modem or HP All-in-One Internet connection (if applicable) Cause: Your computer's Local ...
Page 35 - Wireless setup troubleshooting; Broadcast SSID
Solution: Make sure you have an active network connection. To make sure your network connection is active 1. If the connections are secure, turn off the power on the HP All-in-One, and then turn it onagain. Press the On button on the control panel to turn the HP All-in-One off, and press it again to...
Page 37 - Invalid WEP key during wireless setup; Invalid passphrase during wireless setup
Cause: The setting for MAC address filtering might be enabled on your wireless router. Solution: Disable MAC address filtering on your wireless router until the HP All-in-One has successfully connected to your network. If you re-enable MAC address filtering on your wirelessrouter, make sure the MAC ...
Page 38 - To clear a paper jam from the rear door; OK; To clear a paper jam from the top door
To clear a paper jam from the rear door 1. Turn off the HP All-in-One. 2. Press in the tab on the rear door to release the door. Remove the door by pulling it away fromthe HP All-in-One. CAUTION: Trying to clear a paper jam from the front of the HP All-in-One can damage the print mechanism. Always a...
Page 39 - If you have a problem, follow these steps:
4. Gently pull the paper out of the rollers. CAUTION: If the paper tears when you are removing it from the rollers, check the rollers and wheels for torn pieces of paper that might be remaining inside the device. If you do notremove all the pieces of paper from the HP All-in-One, more paper jams are...
Page 40 - System requirements; Paper specifications; Energy Star® notice; Tech
5 Technical information The technical specifications and international regulatory information for the HP All-in-One areprovided in this section. System requirements Software system requirements are located in the Readme file. Product specifications For product specifications, go to the HP Web site a...
Page 41 - Regulatory notices; Regulatory model identification number; Tec
ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR partner,HP has determined that this product meets ENERGY STAR guidelines for energy efficiency.For more information on ENERGY STAR guidelines, go to the following Web site: www.energystar.gov Ink cartridge yield Ink fro...
Page 42 - Warranty
Warranty Chapter 5 40 Technical information Tech nical info rmat ion
