HP BL465c G7 - Manual

Customer self repair 7 NOTA: alcuni componenti HP non sono progettati per la riparazione da parte del cliente. Per rispettare la garanzia, HP richiede che queste parti siano sostituite da un centro di assistenza autorizzato. Tali parti sono identificate da un "No" nel Catalogo illustrato dei...

Customer self repair 8 anrufen und sich von einem Mitarbeiter per Telefon helfen lassen. Den Materialien, die mit einem CSR-Ersatzteil geliefert werden, können Sie entnehmen, ob das defekte Teil an HP zurückgeschickt werden muss. Wenn es erforderlich ist, das defekte Teil an HP zurückzuschicken, müs...

Customer self repair 10 bijbehorende documentatie worden geretourneerd in het meegeleverde verpakkingsmateriaal. Als u het defecte onderdeel niet terugzendt, kan HP u voor het vervangende onderdeel kosten in rekening brengen. Bij reparatie door de klant betaalt HP alle verzendkosten voor het vervang...

Customer self repair 11 Serviço de garantia apenas para peças A garantia limitada da HP pode incluir um serviço de garantia apenas para peças. Segundo os termos do serviço de garantia apenas para peças, a HP fornece as peças de reposição sem cobrar nenhuma taxa. No caso desse serviço, a substituição...

Illustrated parts catalog 16 Illustrated parts catalog Server blade components Item Description Spare part number Customer self repair (on page 5 ) 1 System board assembly 598247-001 Mandatory 1 2 DIMMs — — a) 8-GB, dual-rank, PC3-10600, registered 595097-001 Mandatory 1 b) 4-GB, dual-rank, PC3-1060...

Removal and replacement procedures 21 Removal and replacement procedures Required tools You need the following items for some procedures: • T-15 Torx screwdriver (provided inside the access panel) • HP Insight Diagnostics software (" HP Insight Diagnostics " on page 48 ) Safety consideration...

Removal and replacement procedures 22 Symbols on equipment The following symbols may be placed on equipment to indicate the presence of potentially hazardous conditions. This symbol indicates the presence of hazardous energy circuits or electric shock hazards. Refer all servicing to qualified person...

Removal and replacement procedures 23 This method initiates a controlled remote shutdown of applications and the OS before the server blade enter standby mode. • Press and release the Power On/Standby button. This method initiates a controlled shutdown of applications and the OS before the server bl...

Removal and replacement procedures 24 3. Remove the server blade. 4. Place the server blade on a flat, level work surface. WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them. CAUTION: To prevent damage to...

Removal and replacement procedures 25 Hard drive blank CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade or the enclosure unless all hard drive and device bays are populated with either a component or a blank. Remove the component as indicated. To replace the b...

Removal and replacement procedures 26 b. Release the hard drive tray, slide it forward until it locks, and then press hard drive carrier 1 down to access hard drive 2. c. Remove hard drive 2. To replace the component, reverse the removal procedure. DIMM baffle CAUTION: To avoid damage to the server ...

Removal and replacement procedures 27 3. Remove the access panel (" Access panel " on page 24 ). 4. Disconnect the cables, and then remove the DIMM baffle. To replace the component, reverse the removal procedure. DIMMs To remove the component: 1. Power down the server blade (on page 22 ). 2....

Removal and replacement procedures 28 HP Smart Array Controller To remove the component: 1. Power down the server blade (on page 22 ). 2. Remove the server blade (on page 23 ). 3. Remove the access panel (" Access panel " on page 24 ). 4. Disconnect the cables, and then remove the DIMM baffl...

Removal and replacement procedures 29 Mezzanine card Optional mezzanine cards enable network connectivity or provide Fibre Channel support. For mezzanine card locations, see the system board components (on page 53 ). Because mezzanine cards are supported on multiple server blade models, the mezzanin...

Removal and replacement procedures 30 1. Install the mezzanine card. Press down on the connector to seat the board. 2. Install the access panel (" Access panel " on page 24 ). Cache module capacitor pack To remove the component: 1. Power down the server blade (on page 22 ). 2. Remove the ser...

Removal and replacement procedures 31 Front panel/hard drive cage assembly To remove the component: 1. Power down the server blade (on page 22 ). 2. Remove the server blade (on page 23 ). 3. Remove the access panel (" Access panel " on page 24 ). 4. Remove all hard drive blanks (" Hard d...

Removal and replacement procedures 33 3. Remove the thermal interface media protective cover. 4. Align and install the heatsink. Alternate tightening the screws until the heatsink is seated properly. 5. Install the access panel (" Access panel " on page 24 ). Processor WARNING: To reduce the...

Removal and replacement procedures 38 7. Align and install the heatsink. Alternate tightening the screws until the heatsink is seated properly. 8. Install the access panel (" Access panel " on page 24 ). System board To remove the component: 1. Power down the server blade (on page 22 ). 2. R...

Removal and replacement procedures 42 10. Install the hard drives (" Hard drive " on page 25 ). IMPORTANT: To avoid damage to the server blade, support the riser board when installing the TPM board and rivet. 11. If necessary, install the TPM module. For more information, see the HP ProLiant...

Cabling 44 Cabling Hard drive power cabling Hot-plug SAS/SATA hard drive cabling

Cabling 45 Cache module capacitor pack cabling Using the HP c-Class Blade SUV Cable The HP c-Class Blade SUV Cable enables the user to perform server blade administration, configuration, and diagnostic procedures by connecting video and USB devices directly to the server blade. For SUV cable connect...

Cabling 46 2. Connect the video connector to a monitor. 3. Connect a USB mouse to one USB connector. 4. Connect a USB keyboard to the second USB connector. Item Description 1 Monitor 2 USB mouse 3 USB keyboard 4 HP c-Class Blade SUV Cable Accessing a server blade with local media devices Use the fol...

Diagnostic tools 48 Diagnostic tools Troubleshooting resources The HP ProLiant Servers Troubleshooting Guide provides procedures for resolving common problems and comprehensive courses of action for fault isolation and identification, error message interpretation, issue resolution, and software main...

Diagnostic tools 49 • From within HP SIM • From within operating system-specific IML viewers: o For Windows®: IML Viewer o For Linux: IML Viewer Application • From within the iLO 3 user interface • From within HP Insight Diagnostics (on page 48 ) • From within the Onboard Administrator GUI For more ...

Diagnostic tools 50 Both HP Insight Remote Support solutions are available at no additional cost to customers with a valid warranty on HP technology, an HP Care Pack Service or HP contractual support agreement. For more information, see the HP website

Component identification 51 Component identification Front panel components Item Description 1 Serial label pull tab 2 SUV connector* 3 Server blade release button 4 Power On/Standby button 5 Server blade release lever 6 Hard drive bays * The SUV connector and the HP c-Class Blade SUV cable are for ...

Component identification 53 Online/activity LED (green) Fault/UID LED (amber/blue) Interpretation Flashing regularly (1 Hz) Amber, flashing regularly (1 Hz) Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. The drive is part of an array that is underg...

Component identification 54 Item Description 1 DIMM slots (Processor 2) 2 DIMM slots (Processor 1) 3 Smart Array connector 4 TPM security rivet (optional) 5 Micro SD connnector 6 Internal USB connector 7 Mezzanine connector 2 (Type I or Type II mezzanine) 8 Enclosure connector 9 Mezzanine connector ...

Component identification 55 Item PCIe Mezzanine connector 2 x8, Type I or II mezzanine card A PCIe x4 mezzanine connector supports x8 cards at up to x4 speeds. A PCIe x8 mezzanine connector supports x16 cards at up to x8 speeds. System maintenance switch Position Function Default 1* iLO 3 security o...

Component identification 56 9. Change position 6 of the system maintenance switch to off. 10. Repeat steps 5 and 6. IMPORTANT: When the server blade boots after NVRAM is cleared, a delay of up to 2 minutes is normal. During this delay, the system appears non-functional. Do not attempt any procedures...

Specifications 58 Specifications Environmental specifications Specification Value Temperature range* — Operating 10 ° C to 35 ° C (50 ° F to 95 ° F) Non-operating -30 ° C to 60 ° C (-22 ° F to 140 ° F) Relative humidity (noncondensing)** — Operating 10% to 90% @ 28 ° C (82.4 ° F) Non-operating 5% to...

Acronyms and abbreviations 59 Acronyms and abbreviations ADU Array Diagnostics Utility CSR Customer Self Repair ESD electrostatic discharge iLO 3 Integrated Lights-Out 3 IML Integrated Management Log ORCA Option ROM Configuration for Arrays POST Power-On Self Test PSP ProLiant Support Pack PXE Prebo...

Index 61 A access panel 24 accessing a server blade with local KVM 45, 46 ADU (Array Diagnostic Utility) 49 B batteries, replacing 42 battery 42 buttons 51 C cables 44, 45 cabling 44, 45 cache module capacitor pack 30, 45 cache module capacitor pack cabling 45 components 16, 21, 22, 23, 24, 25, 26, ...