HP 3C590 - Manual

HP 3C590

HP 3C590 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
Page: / 34

Table of Contents:

  • Page 2 – Notice; is a trademark of Intel Corporation.
  • Page 3 – General information to read before installing; Sound conflict under Win 95 on VLi8 only
  • Page 4 – Press F2 to go to CMOS setup.
  • Page 5 – Connect network cable media to the 3COM 3C590 network adapter.; Device Configuration
  • Page 6 – Connecting to a Windows NT 3.51 Server; Click on “YES” to restart the system when prompted.
  • Page 7 – Requirements; Procedure
  • Page 8 – Connecting to a Windows NT 4.0 Server
  • Page 9 – Novell Netware 3.12 Server that supports IPX network protocol.
  • Page 10 – Connecting to a Netware 3.12 Server
  • Page 11 – Novell Netware 4.11 Server that supports IPX network protocol.
  • Page 12 – Connecting to a Netware 4.11 Server
  • Page 13 – Microsoft Windows NT 4.0 Workstation; HP Vectra with Windows NT 4.0 Workstation.
  • Page 14 – Insert the 3COM 3C590 driver disk into the floppy drive.
  • Page 16 – Click on “Next” to continue the network card installation.
  • Page 18 – Connecting to a Novell NetWare 3.12 Server
  • Page 21 – Connecting to a Novell NetWare 4.11 Server
  • Page 23 – Microsoft Windows NT3.51 Workstation
  • Page 24 – Press “OK” to continue from “Network Settings” dialog box.
  • Page 25 – Microsoft Windows NT 3.51 Workstation
  • Page 29 – Microsoft Windows for Workgroups 3.11; Microsoft Windows for Workgroups 3.11 media.
  • Page 30 – Accept the applicable network protocols, and then click on “CLOSE”.
  • Page 32 – Accept the default network board settings and press “F10” to save it.
Loading the manual

3COM Etherlink III 3C590 PCI 10BT
Network Adapter

Installation Guide

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Notice; is a trademark of Intel Corporation.

Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not ...

Page 3 - General information to read before installing; Sound conflict under Win 95 on VLi8 only

General information to read before installing General information to read before installing On all systems : b efore installing LAN card, go into Bios setup and set PnP OS field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibl...

Page 4 - Press F2 to go to CMOS setup.

General information to read before installing 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS.

Other HP Models

All HP Other