HP 3C339 - Manual

HP 3C339

HP 3C339 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
Page: / 30

Table of Contents:

  • Page 2 – Notice; is a trademark of Intel Corporation.
  • Page 3 – Connecting to a Netware 3.12 Server; Windows for
  • Page 4 – Specify the settings as listed below:
  • Page 5 – Requirements
  • Page 6 – At the “Network” dialogue box, click on the “Identification” folder.
  • Page 7 – Connecting to a Netware 4.11 Server
  • Page 9 – Device Configuration
  • Page 10 – Highlight the adapter labeled “3Com Token Ring in PCI Mode”
  • Page 11 – Connecting to a Windows NT Server 3.51
  • Page 12 – Press “Enter” to continue the installation.
  • Page 15 – Windows NT
  • Page 16 – Insert the Windows NT Workstation CD.
  • Page 19 – Connecting to a Windows NT Server 4.0
Loading the manual

TokenLink Velocity PCI Network
Interface Card
3C339

Installation Guide

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Notice; is a trademark of Intel Corporation.

Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not ...

Page 3 - Connecting to a Netware 3.12 Server; Windows for

1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Workgroups Requirements • HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 in-stalled. • 3COM 3C339TokenRing card and drivers disk DOS ODI - File Name: tlvmp339.dos DOS and MS-...

Page 4 - Specify the settings as listed below:

1 Connecting to a Netware 3.12 Server Windows for Workgroups 7 Execute INSTALL.EXE. 8 Specify the settings as listed below: ❒ C:\NWCLIENT ❒ Yes ❒ Yes ❒ C:\WINDOWS ❒ No ❒ 3Com Fast Etherlink/Etherlink III Bus Master 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339...

Other HP Models

All HP Other