HP 3C509B-TP - Manual

HP 3C509B-TP

HP 3C509B-TP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
Page: / 46

Table of Contents:

  • Page 2 – Notice; is a trademark of Intel Corporation.
  • Page 3 – Connecting to a Netware 3.12 Server; Windows for; Vectra VL8
  • Page 4 – If changes are required, save those changes and exit.
  • Page 5 – Select 16-bit LAN Drivers and hit the enter key.
  • Page 7 – Connecting to a Netware 3.12 Server; Requirements
  • Page 9 – Connecting to a Netware 4.11 Server
  • Page 10 – Specify the settings as listed below:
  • Page 11 – YES
  • Page 13 – Connecting to a Netware 4.11 Server
  • Page 15 – Connecting to a Windows NT Server 3.51
  • Page 16 – Select the “Networks” button in the “Network Setup” dialog box.
  • Page 21 – To complete the installation, select “Yes” to restart your computer.
  • Page 23 – Windows NT
  • Page 25 – Remove the 3com software driver diskette and reboot the machine.
  • Page 26 – At the “Network Settings” dialog box, click on “OK.”
  • Page 29 – When “Windows NT is now ready to start the network...” click on “Next.”
  • Page 31 – Connecting to a Windows NT Server 4.0
  • Page 33 – Connecting to a Windows NT Server 4.0
Loading the manual

Etherlink IIIB ISA Network
Interface Card (10BT)
3C509B-TP

Installation Guide

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Notice; is a trademark of Intel Corporation.

Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not ...

Page 3 - Connecting to a Netware 3.12 Server; Windows for; Vectra VL8

1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Workgroups Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • 3COM Etherlink 3C509-B ethernet card and drivers disk ver. 5.0.DOS ODI - File Name: 3C5X9.COM Si...

Page 4 - If changes are required, save those changes and exit.

1 Connecting to a Netware 3.12 Server Windows for Workgroups 4 Select “CONFIGURE NIC,” and verify the resource settings listed above under the heading “Device Configuration.” 5 If changes are required, save those changes and exit. 6 Remove the 3com cards driver diskette and insert Netware client for...

Other HP Models

All HP Other