Honeywell TH1100DV1000 User Manual

Page 1 - Product Identification and Support Information

Identification of covered models, compatible system types (heat-only, heat/cool, heat pump), safety warnings for installation, and customer support contact information.

Page 2 - Wallplate Installation Procedure

Step-by-step instructions for removing and reinstalling the wallplate, wiring through holes, installing anchors, mounting the plate, and electrical safety precautions regarding mercury disposal.

Page 3 - Power Options and Wiring Configurations

Details on power options, battery installation, terminal block connections, and terminal designations for heating/cooling valve energization, fan relay, compressor contactor, and 24 Vac sources across various models.

Page 4 - Wiring Guide for System Types

Wiring guide detailing terminal connections and wire specifications for conventional and heat pump systems, including configurations like 2H/1C, 1H/1C, Heat Only, and Cool Only, along with transformer requirements.

Page 5 - Fan Operation and Mounting

Instructions for configuring fan operation settings for specific models and guidance on mounting the thermostat by aligning it with wallplate tabs and managing excess wiring.

Page 6 - Installer Setup Mode Configuration

Step-by-step instructions for entering installer setup mode, modifying function numbers using arrow buttons, saving changes, and automatic saving features after inactivity.

Page 7 - Advanced Installer Settings and Protection

Configuration options including heating cycle rates, auxiliary heat rates, compressor cycle rates, early start, temperature display, compressor protection, clock display, and program schedule restoration, along with factory defaults and damage prevention warnings.

Page 8 - Special Functions and Specifications

Details on special functions such as Early Start and Compressor Protection, available accessories and replacement parts, and technical specifications including temperature ranges, electrical ratings, operating conditions, and physical dimensions.

Page 9 - Model Compatibility and System Support

List of covered models (TH1100DV, TH2110DV/TH1110DV, TH2210DV/TH1210DV) and supported heating/cooling systems including gas, electric, heat pumps, and 750 mV systems, emphasizing technician installation.

Page 10 - Wall Plate Installation Steps

Numbered steps for detaching the wall plate from the thermostat, mounting it on the wall, and safety warnings concerning electrical shock and mercury-containing thermostat disposal.

Page 11 - Terminal Wiring Designations

Power supply options, terminal wiring designations for model variants, battery installation diagrams, and a chart specifying terminal functions (B, O, G, Y, W, C, R, Rc, Aux/E) for different series.

Page 12 - Heat Pump Wiring Diagrams

Wiring diagrams and pin assignments for heat pump and heating systems, detailing connections for reversing valves, compressors, fans, power supplies, wire gauge, and safety requirements based on system configuration.

Page 13 - Fan Configuration and Mounting Details

Instructions for configuring the fan selector for specific models and guidance on mounting the thermostat by aligning it with wall brackets and securing it with an insulator.

Page 14 - Configuration Mode Navigation

Step-by-step instructions for entering configuration mode, navigating and modifying settings using up/down buttons, and procedures for saving and exiting the menu, including automatic saving notes.

Page 15 - Installer Configuration Settings

Detailed installer configuration options for heating units, including heating cycles per hour, auxiliary heating control, compressor startup, temperature display, protection settings, clock format, low-temperature range, and calendar reset, noting default values.

Page 16 - System Technical Specifications

Features such as early startup and compressor protection, replacement parts with part numbers, and technical data including temperature ranges, electrical requirements, humidity limits, and physical dimensions for the heating and cooling system.

Page 17 - Model Support Summary

Summary of models covered (TH1100DV, TH2110DV/TH1110DV, TH2210DV/TH1210DV) and supported heating systems (gas, electric, heat pump), emphasizing installation requirements and support contact.

Page 18 - Wall Plate Installation Procedure

Steps for removing the old wall plate, drilling holes in walls (specifying drywall/plaster sizes), installing expansion anchors, and mounting the new plate with screws, including electrical safety warnings.

Page 19 - Power Supply and Terminal Wiring

Details on power supply options and terminal designations for PRO series models, including battery installation diagrams and wiring for compressor control, fan relay, and 24V AC power.

Page 20 - Heat Pump Wiring Assignments

Wiring diagrams and terminal pin assignments for heat pump/heating systems, detailing connections for reversing valves, fan relays, compressor contactors, power supplies, cable specifications, and terminal usage.

Page 21 - Fan Operation and Mounting Guidance

Instructions for configuring the fan operation switch for specific heating systems and guidance on mounting the thermostat, including cable management and wall opening insulation.

Page 22 - Thermostat Setting Configuration Interface

Step-by-step instructions for using up/down buttons to enter the configuration menu, navigate settings, and save changes, illustrated by interface diagrams showing button functions.

Page 23 - Installation Settings and Defaults

Configuration settings for Serie PRO thermostats, including cycle speed, compressor range, temperature display, and temperature range, along with default factory settings based on the heating system type. A warning regarding rapid compressor cycling is included.

Page 24 - Special Functions and Physical Data

Details on special functions like pre-cooling and compressor protection, a list of replacement parts including a cover plate, and technical specifications such as temperature ranges, electrical ranges, operating humidity, and physical dimensions.