Honeywell SN0500- User Manual
Honeywell SN0500– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CONTENTS; Address on back cover of this guide
- Page 3 – EXTERNAL CONNECTIONS; Figure 1. External Connections
- Page 4 – ANALOGUE OUTPUTS
- Page 5 – Relay 1; GAS DETECTION RANGE
- Page 6 – STANDARD DEFAULT SETTINGS
- Page 7 – CONNECTIONS AT A GLANCE; Connector Pin Description
- Page 8 – Automation & Control Solutions
SN0500 / SN0501
REFRIGERANT GAS LEAK DETECTOR
INSTALLATION / USER GUIDE
Copyright © 2004 Honeywell Control Systems Ltd.
All Rights Reserved
EN1B-0014UK07 R0404
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Honeywell SN0500
Summary
GAS LEAK DETECTOR INSTALLATION & USER GUIDE CONTENTS 1. INTRODUCTION .................................................................................................... 3 2. EXTERNAL CONNECTIONS ................................................................................. 3 3. POWER SUPPLY ...
GAS LEAK DETECTOR INSTALLATION & USER GUIDE 1. INTRODUCTION The Honeywell Refrigerant Gas Detection sensors, SN0500 (for refrigerant R404a) and SN0501 (for refrigerant R410) are used to detect the leakage of refrigerant gas and notify a monitoring system or provide a local indication (i.e. audib...
GAS LEAK DETECTOR INSTALLATION & USER GUIDE 3. POWER SUPPLY The Power supply is connected at Con 1 (see Fig. 1) Green LED on - shows power connected. Pin 1 = 0V, Pin 2 = 12 to 24 VAC or 12 to 30VDC, Pin 3 = Earth. The 0V (pin 1) on the power supply terminal block (CON 1) can withstand 50V AC or ...
