Honeywell Home T3 Pro - User Manual
Honeywell Home T3 Pro Thermostat – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – System operation settings; Fan operation settings
- Page 3 – Battery replacement
- Page 4 – Alerts screen; Alerts codes
- Page 5 – Troubleshooting; Electrical Ratings
- Page 6 – -year limited warranty
- Page 9 – Lire avant l’installation; Thermostat; Guide de l’utilisateur; Service à la clientèle
- Page 10 – Réglages pour le fonctionnement du système; Réglages pour le fonctionnement du ventilateur
- Page 11 – Remplacement des piles
- Page 12 – Écran d’alerte; Codes d’alerte
- Page 13 – Dépannage; Caractéristiques électriques
- Page 14 – Garantie limitée de 5 ans
- Page 17 – Leer antes de instalar; T3 Pro; Termostato; Guía del usuario; Asistencia al cliente
- Page 18 – Ajustes de funcionamiento del sistema
- Page 19 – Reemplazo de las baterías
- Page 20 – Pantalla de alerta; Códigos de las alertas
- Page 21 – Localización y solución de problemas; Clasificaciones eléctricas
- Page 22 – Poliza de garantia
Package Includes:
• T3 Pro Thermostat
• UWP™ Mounting System
• Decorative Cover Plate –
Small; Size 4.72” H X 5.9” W
(120 mm H X 150 mm W)
• Screws and Anchors
• 2 AA Batteries
• Thermostat Literature
T3 Pro
Thermostat
User Guide
TH3110U2008,
TH3210U2004
Read before installing
Heat On
Menu
Fan Auto
Heat On
Menu
Fan Auto
Call Customer Care toll-free at
1-800-468-1502
.
Customer assistance
Thermostat controls
The screen will wake up by pressing any of the three buttons. If powered by the C wire, the screen stays lit for 45 seconds
af ter you complete changes. If powered by batter y only, the screen stays lit for 8 seconds. Depending on how your
thermostat was installed, the screen light may always be on.
Read before installing
•
System status
information
Cool On/Heat On/Em
Heat On, Compressor
Protection
•
Indoor
temperature
setpoint
Press + or - to change
temperature setting
•
Actual indoor
temperature
•
Temperature/
Navigation
buttons
Press to increase or
decrease temperature
setpoint and to
navigate menus and
menu options
•
Menu
Press to display
options. Change mode
(Heat, Off, Cool) or Fan
settings options.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Honeywell
- Model
- Home T3 Pro
- Document type
- User Manual
- Category
- Thermostat
- Language(s)
- English, Spanish, French
- Pages
- 24
- Format
Summary
2 System operation settings 1. Press Menu , and then press the Mode (+) button to cycle to the next available System mode. 2. Cycle through the modes until the required System mode is displayed, and then press Done . NOTE: Available System modes vary by model and system settings. System modes: ‒ Aut...
3 Batteries are optional (to provide backup power) if your thermostat was wired to run on AC power when installed. If your thermostat was not wired to run on AC power, then batteries are required.Install fresh batteries immediately when the low battery icon appears. The icon appears about two months...
4 Alerts screen 1. You will see the alert icon and the alert number on the screen. 2. Press Next (+) to see additional alerts, if any. Then press Done to go back to the home screen. NOTE: If the alert is a critical alert, you may not be able to access the home screen and should call a HVAC professio...