Honeywell 107324A- Manual
Honeywell 107324A– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ORDERING INFORMATION
- Page 7 – GENERAL INFORMATION; Immersion Wells; Material Selection
- Page 8 – Securing Bulb in Well; Capillary Compression Fittings; Element Holders; INSTALLATION; When Installing this Product...; WARNING
- Page 9 – Immersion Well Mounting; Securing Bulb with Mounting Clamp; Securing Bulb with Spring Clip
- Page 10 – Securing Bulb in Wells with Setscrew
- Page 11 – Duct Mounting with Capillary Compression
- Page 12 – Bulb Shields; CAUTION
- Page 13 – CHECKOUT
PRODUCT DATA
68-0040-04
Immersion Wells and Compression Fittings
FOR TEMPERATURE CONTROLLERS
APPLICATION
Immersion wells, compression fittings and element holders
are used with Aquastat® Temperature Controllers to hold the
temperature sensing bulb in the controlled medium.
Immersion wells and compression fittings also prevent
leakage of the controlled medium.
FEATURES
• Immersion wells and compression fittings are
available to fit a 1/2-14 or 3/4-14 NPT tapping with
a range of insulation depths.
• Immersion wells and compression fittings are
available in a variety of lengths and diameters.
• Immersion wells and compression fittings are
available in a variety of materials, to suit the
application. Materials include: brass, copper,
stainless steel, mild steel or Monel.
• Element holders support the capillary and bulb
or an averaging element in duct applications.
• Bulb shields protect the sensing bulb from sun
and weather with the bulb installed outdoors.
• Accessories, including mounting clips, heat-
conductive compound, waste nuts, a pipe strap
and a well adapter, are available for mounting
sensing bulbs in various applications.
• Immersion wells allow heat transfer while
protecting the sensing bulb from contact with the
controlled medium.
• Immersion wells permit removal of the sensing
bulb for testing or replacement without draining
the system.
• Compression fittings seal the boiler and allow
bulb insertion directly into the controlled
medium.
IMMERSION WELL
112632AA
IMMERSION WELL
107324A
ELEMENT
HOLDER
104484A
COMPRESSION FITTING
121371B
Contents
Application ........................................................................
Features ...........................................................................
Specifications ...................................................................
Ordering Information ........................................................
General Information ..........................................................
Installation ........................................................................
Checkout .......................................................................... 13
Cross Reference .............................................................. 13
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Honeywell 107324A
Summary
IMMERSION WELLS AND COMPRESSION FITTINGS 68-0040—04 2 ORDERING INFORMATION When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the TRADELINE® Catalog or price sheets for complete ordering number. If you have additional questions, need furth...
IMMERSION WELLS AND COMPRESSION FITTINGS 7 68-0040—04 GENERAL INFORMATION Immersion Wells An immersion well consists of a metal tube, called the well shell, closed on one end. A well spud externally threaded to fit standard boiler tappings is welded or brazed on the open end. See Fig. 1. The well is...
IMMERSION WELLS AND COMPRESSION FITTINGS 68-0040—04 8 threaded end of the spud can extend into the controlled medium. Consider this additional length when determining how far the well extends into the controlled medium. The length of the well shell starting at the end of the spud defines the inserti...
