Honeywell 51035 01 - User Manual
Honeywell 51035 01 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – the tip of the blades to any obstruction.
- Page 4 – Failure to disconnect the power supply; Standard Mount; clearance. Ensure the ceiling angle is not steeper than 10 degrees.; Flushmount Installation
- Page 5 – ASSEMBLY INSTRUCTIONS; installed correctly.
- Page 6 – Do NOT wire the
- Page 8 – TROUBLESHOOTING; Syncing instructions:; PROBLEM
- Page 9 – The Honeywell Trademark is used under license from
Kaliza Ceiling Fan
User Guide
Model #51035, 51036
Home
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 SAFETY INFORMATION CARE AND MAINTENANCE Please read and understand this entire manual before attempting to assemble, operate or install the product. • Before you begin installing the fan, disconnect the power by removing fuses or turning off the circuit breakers. • Make sure all electrical connect...
4 D ASSEMBLY INSTRUCTIONS PREPARATION Before beginning the assembly of this product, ensure all parts are present. Compare all parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated assembly time: 2 hoursT...
5 ASSEMBLY INSTRUCTIONS 4. Remove the downrod clip and downrod pin from the downrod. Then partially loosen the two set screws in the yoke at the top of the motor assembly (Figure 2.4). 5. Feed the fan wires through the yoke cover, canopy and downrod (Figure 2.5). 6. Slide the downrod into the yoke o...
