Henny Penny CF-941 - Manual
Henny Penny CF-941 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Place the hot product inside the drawer.; PRODUCT; Serve the product first that has been in the cabinet
- Page 4 – Turn POWER switch to the ON position.; Temperature Setpoint Programming
- Page 6 – PROGRAMMING; DISPLAY
Model CF-941
SECTION 3. OPERATION
3-1. INTRODUCTION
This section provides operating procedures for the
multipurpose holding cabinets. Read the Introduction,
Installation and Operation Sections and all instructions
should be followed before operating the cabinet.
This section contains an explanation of all controls,
components, and information on operating procedures
and daily
maintenance.
3-2. OPERATING
Figure 3-1 identifies and describes the functions of all the
CONTROLS AND
operating controls and components of the cabinet.
COMPONENTS
Item
Description
Function
No.
1
Digital Display
An LED display which shows the time of day and drawer
temperature
2
LEDs
When illuminated, indicates which drawer is heating
3
Up and Down
Used when programming the controls, changing the
Buttons
display, and accessing the Special Program Mode
4
POWER Switch
A rocker switch that controls the power to the unit
5
TEMP Button
Used to view the drawer temperature and to set the setpoint
temperature for the drawer
6
SET Button
Used in the Program Mode
7
Timer Buttons
Used to start a timing cycle for a particular pan or to view
the time remaining in the cycle; they are also used when
programming the times
203
3-1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Model CF-941 Figure 3-1 3-3. START-UP Before using the cabinet, it should be thoroughlycleaned as described in the cleaning proceduressection of this manual. To put the cabinet intooperation, move each POWER switch to the ONposition and adjust each control to the appropriatetemperature. The power li...
Model CF-941 3-6. OPERATION AND Unit Operation PROGRAMMING Before operating the holding cabinet, read andunderstand this complete operation manual (suppliedwith each unit). The following steps are meant to beguidelines, not complete operating instructions. 1. Turn POWER switch to the ON position. 2....
Model CF-941 3-6. OPERATION AND 6. Press and release the SET button 4 times and “In-” PROGRAMMING shows in the display. In- means initialization. Press (Continued) and hold the UP or DOWN button at this time and allow the display to count down from 3. The buzzer will sound and the controls will be s...
