Henny Penny BW-1 - Manual
Henny Penny BW-1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Model
BW-1/BW-4/BW-4/3/BW-6/BW-8
Due to the lower temperature settings, this unit has been de
signed to hold NON-POTENTIALLY HAZARDOUS FOOD
ONLY. This unit will NOT hold potentially hazardous food at
a safe temperature
1. Turn power switch to the ON position.
2. After a sequence of codes the display shows the time
of day, or “ON”.
Press and hold the TEMP button to view the actual
temperature
of
the
unit.
Temperature Setpoint Programming
1.
Press and hold the TEMP button for 6 seconds. The actual
temperature
shows
fi rst followed by the fl ashing setpoint
temperature.
2.
While holding in on the TEMP button, press and release
the
SET
button. Now the setpoint temperature blinks at a
faster rate. Now release the TEMP
button.
3.
Press the UP and DOWN
buttons to change the setpoint
temperature.
4. Once the desired setpoint temperature (preprogrammed
maximum temperature) is reached, press the SET button to
return to normal operation mode and the setpoint is saved.
“Time of Day” Programming
Press and hold the SET
button while using the UP and DO
buttons to set the desired time. When the SET
button is re
leased, the time is saved.
SPECIAL PROGRAMMING
1. With POWER switch off, press and hold both the UP
and
DOWN
buttons, and then turn the POWER switch on until “SP”
shows on the display. Release the UP
and DOWN
buttons, and
“
o
F” or “
o
C” shows on the display.
2. Press the UP
or DOWN
buttons to toggle from “
o
F” to “
o
C”,
or
“
o
C” (Celsius) to “
o
F” (Fahrenheit).
OPERATING AND
PROGRAMMING
INSTRUCTIONS
306
2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
