Henny Penny 341 - Manual
Henny Penny 341 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Model OFE/OFG/OEA/OGA-341, 342
5-1. TROUBLE SHOOTING GUIDE
Problem Cause Correction
POWER switch ON but fryer
• Open circuit
•
Plug fryer in
completely inoperative
•
Check breaker or fuse at supply
box
Shortening will not
•
Open high limit
•
Reset high limit per
heat but lights are on.
circuit
High Limit Temperature
Error message “E10”
Control Section
•
Drain valve open
•
Turn drain valve handle to
Error message “E15”
closed position
Foaming or boiling
•
Water in shortening
•
At end of Cook Cycle, drain
over of shortening
shortening and clean
•
Improper or bad
•
Use recommended shortening
shortening
•
Improper filtering
•
Refer to the procedure covering
filtering the shortening
•
Improper rinsing after
•
Clean and rinse the frypot, then
cleaning the fryer
dry thoroughly
Shortening will not
•
Drain valve clogged
•
Open valve, force cleaning
drain from frypot
with crumbs
brush through drain
Filter switch on,
•
Motor thermal
•
Reset thermal switch per section
motor does not run
protector tripped
on Filter Pump Motor
Protector – Manual Reset
More detailed troubleshooting information is available in the Technical Manual, available at
www.hennypenny.com, or 1-800-417-8405 or 1-937-456-8405.
903 5-1
SECTION 5. TROUBLESHOOTING
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
