Heat & Glo 6000TRS-CE - Manual
Heat & Glo 6000TRS-CE – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY AND WARNING INFORMATION; Users; ALERTED; Installers Guide
- Page 4 – Service Parts; Beginning Manufacturing Date: Jan 2004; Part number list on following page.; Log Set Assembly; 6” Direct Vent Gas Fireplace
- Page 5 – Service Parts List; ITEM
- Page 6 – Valve Assemble Parts List; Valve Assembly
- Page 7 – Appliance Certifi cation; The Heat & Glo fi replace models discussed in this; Installation Regulations; MODEL; BSI
- Page 8 – Do
- Page 9 – Location Centimeters
- Page 10 – Figure 2. Fireplace Dimensions, Locations, and Space Requirements; Clearance Requirements; The top and back of the fi replace are defi ned by stand-offs.; RECESSED DEPTH; Figure 3. Minimum Clearances; Minimum Clearances from the Flue Pipe to Combustible Materials
- Page 11 – Note; ished hearth frame. Dimensions; Figure 4. Framing Dimensions; CAUTION
- Page 12 – Figure 5. Flue Components and Terminations; A. Flue System Approvals; TOP and REAR; Identifying Flue Components; MUST BE
- Page 14 – Figure 7. Straight up Vertical Flue; STRAIGHT OUT HORIZONTAL FLUE; CAP
- Page 15 – For corner installations: A 15.2 cm MINIMUM; ELBOW
- Page 16 – Figure 11. Flue with Two 90° Elbows
- Page 17 – Figure 12. Flue with Two 90° Elbows
- Page 20 – B. Installing Flue Components; Venting Out the Rear Flue; CUT HERE; Venting
- Page 22 – Figure 17. Installing Support Brackets; For Horizontal Runs -; F o r Ve r t i c a l R u n s -
- Page 23 – REQUIRED; Figure 19. Hole and New Framing Members
- Page 24 – NOT; Figure 21. Attic Firestop; IS
- Page 25 – Figure 22. Venting through the Wall
- Page 26 – Figure 23 DVP Termination Cap
- Page 27 – NOTE; Angle
- Page 28 – Figure 25 Vent Termination Minimum Clearances; N O T E 3; = AREA WHERE TERMINAL IS NOT PERMITTED; Alcove Applications
- Page 29 – Figure 27. Gas Control System; Fireplace; Place the fi replace into; Standing Pilot Ignition System
- Page 31 – Inlet Pressure; Optional Accessories
- Page 32 – Finishing; Note: all dimensions are shown in centimeters; product code
- Page 33 – Figure 31. Sealant Material; Installing the Trim; overlap onto the front face.
- Page 34 – Carefully remove the logs from the packaging.
- Page 36 – Figure 34. Placement of the Ember Material
- Page 37 – WARNING; HOT SURFACES; touch glass until it is cooled
- Page 39 – IMPORTANT; Once annually
- Page 40 – Figure 35. Burner Flame Patterns; MAKE SURE THE FLAMES; Figure 36. Pilot Flame Patterns
- Page 41 – Standing Pilot Troubleshooting; Symptom
- Page 42 – b. Thermopile may not be
- Page 45 – This warranty is void if:; not limited to, improper chimney or venting installation.; LIMITATIONS OF LIABILITY:; plaints related to this noise are not covered by this warranty.
Heat & Glo • 6000TRS-CE • 2049-900 Rev. Q • 2/11
1
Model:
6000TRS-CE
Installers Guide
R E A D T H I S M A N U A L B E F O R E I N S TA L L I N G O R
O P E R AT I N G T H I S A P P L I A N C E . T H I S I N S TA L L E R S
GUIDE MUST BE LEFT WITH APPLIANCE FOR FUTURE
REFERENCE.
Please contact your Heat & Glo dealer with any questions or
concerns. For the number of your nearest Heat & Glo dealer,
please visit www.heatnglo.com.
Printed in U.S.A. Copyright 2011
Heat & Glo, a brand of Hearth & Home Technologies Inc.
7571 215
th
Street West, Lakeville, MN 55044, USA
0086
This is a room sealed appliance and no other ventilation is
required than what is provided.
These instructions are only valid if the following country symbol is
on the appliance. If this symbol is not present on the appliance,
it is necessary to refer to the technical instructions which will
provide the necessary information concerning the modifi cation
of the appliance to the conditions of use for the country.
These instructions are valid for the following countries: GB, IE
WARNING
This appliance has been supplied with an integral barrier
to prevent direct contact with the fi xed glass panel. DO
NOT operate the appliance with the barrier removed.
HOT SURFACES
!
Glass and other surfaces are hot during
operation AND cool down.
Hot glass will cause burns.
•
DO NOT
touch glass until it is cooled
• NEVER allow children to touch glass
• Keep children away
• CAREFULLY SUPERVISE children in same room as
fi replace.
• Alert children and adults to hazards of high temperatures.
High temperatures may ignite clothing or other fl ammable
materials.
• Keep clothing, furniture, draperies and other fl ammable
materials away.
• Do not store or use gasoline or other fl am-
mable vapors and liquids in the vicinity of
this or any other appliance.
• What to do if you smell gas
- Do not try to light any appliance
- Do not touch any electrical switch. Do not
use any phone in your building.
- Immediately call your gas supplier from a
neighbor’s phone. Follow the gas suppli-
er’s instructions.
- If you cannot reach your gas supplier, call
the fi re department.
• Installation and service must be performed
by a qualifi ed installer, service agency, or the
gas supplier.
WARNING: If the information in these
instructions is not followed exactly, a fi re
or explosion may result causing property
damage, personal injury, or death.
This product is covered by one or more of the following patents: (United States) 5328356, 5601073, 5613487, 5647340, 5890485, 5941237, 5947112,
5996575, 6006743, 6019099, 6053165, 6145502, 6170481, 6374822, 6484712, 6601579, 6769426, 6863064, 7077122, 7098269, 7258116, 7470729 or
other U.S. and foreign patents pending.
Î
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Heat & Glo • 6000TRS-CE • 2049-900 Rev. Q • 2/11 2 ! This appliance is intended for use on a gas installation with a governed meter. ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! SAFETY AND WARNING INFORMATION READ and UNDERSTAND all instructions carefully before starting the installation. FAILURE TO FOLL...
Heat & Glo • 6000TRS-CE • 2049-900 Rev. Q • 2/11 4 Service Parts 6000TRS-CE Beginning Manufacturing Date: Jan 2004 Ending Manufacturing Date: ______ 8 6 7 9 10 11 12 13 14 15 16 17 18 19 Part number list on following page. Log Set Assembly 4 2 3 5 1 36” Direct Vent Gas Fireplace
Heat & Glo • 6000TRS-CE • 2049-900 Rev. Q • 2/11 5 Service Parts List 6000TRS-CE IMPORTANT THIS IS DATED INFORMATION: When requesting service or replacement parts for your appliance please provide model number and serial number. All parts listed in this manual may be ordered from an authorized d...
