HALO HS-1001-XNA - User Manual
HALO HS-1001-XNA Grill – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – NEED MORE INSTRUCTIONS?; WARNING; CAUTION
- Page 3 – Screws and install leg cap.
- Page 5 – Install Left Outer Leg Assembly, Left Inner Leg
- Page 8 – Install Right Outer Leg Assembly, Right Inner Leg
- Page 9 – Install Front Panel and Rear Brace assembly
- Page 10 – Attach the Casters using M12 caster wrench.
- Page 11 – Attach Brackets-Leg Support-Left and right
- Page 13 – Install cooking grid and warming rack.
- Page 14 – Warming rack continued.
- Page 15 – Install side table brackets left and right using
- Page 17 – Install grease cup with cover.
QUICK START GUIDE
HS-1001-XNA
TRILINGUAL ASSEMBLY
STEPS AVAILABLE AT
HALO-PG.COM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
w The manufacturer has made every effort to eliminate any sharp edges. However, you should handle all components with care to avoid accidental injury. WARNING NOTICE: Before assembly, make sure all parts are present. If any part is missing or damaged, do not attempt to assemble the appliance. Contac...
3 w IMPORTANT: Please read all instructions thoroughly before proceeding. Find a large, clean area in which to assemble your HALO Prime550 Pellet Grill. Please refer to the assembly diagram, as necessary. Install Left-Inner Leg using (3)-M6 x 14mm Screws and install leg cap. 1 Leg Cap Left-Inner Leg...
5 Install Left Outer Leg Assembly, Left Inner Leg assembly using pivot bracket 68 & 69A, (2)-M6 x 2.5H x 9.5D shoulder screw, (1)-M6 x 63mm Knob w/ Threaded Shaft and Nylon-Spacer. Tighten screws firmly. Set assembly aside. 3 Pivot Bracket-BPivot Bracket-CM6 x 63mm-Knob w/ Threaded Shaft Nylon S...
