Grizzly Industrial T10499 - Manual
Grizzly Industrial T10499 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Identification
- Page 3 – Safety for Blade Welders
- Page 4 – Power Supply
- Page 6 – Assembly; Extension Cords
- Page 7 – Operations; Blade Preparation; Blade Shear; Overview
- Page 8 – Welding
- Page 10 – NOTICE
- Page 11 – Annealing Weld
- Page 12 – Troubleshooting
- Page 15 – Cabinet Parts
- Page 16 – Controls & Electrical
- Page 17 – Controls & Electrical Parts List
- Page 18 – Machine Labels
- Page 20 – Buy Direct and Save with Grizzly; ORDER
For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]
MODEL T10499/T10500
PORTABLE
BLADE WELDER
INSTRUCTIONS
Copyright © ApriL, 2012 By grizzLy industriAL, inC.
WARNINg: NO PORTION Of ThIS MANUAL MAy BE REPRODUCED IN ANy ShAPE
OR fORM WIThOUT ThE WRITTEN APPROvAL Of gRIzzLy INDUSTRIAL, INC.
#ts14909 printed in tAiWAn
Introduction
this portable blade welder can cut, weld, anneal,
and grind bandsaw blades, which is commonly
done in the following situations:
•
to re-join a blade that has been purposely
cut for making an internal contour cut.
•
to repair a broken blade that is still sharp and
useful.
•
to fabricate a new blade from bulk blade
material.
hot sparks from the welding process can
damage your eyes and skin. During welding
operations, always wear safety goggles and
protective gear, and keep the spark deflec-
tor over the welding clamps to reduce your
risk.
Specifications
T10499:
range of Blade Widths ............................
1
⁄
8
" –
1
⁄
2
"
range of Blade thickness ..............0.02"–0.035"
power supply requirement ..........115V, 15 Amps
Welding power........................................ 1.2 KVA
shipping Weight ........................................50 lbs.
T10500:
range of Blade Widths ............................
3
⁄
8
" –
3
⁄
4
"
range of Blade thickness ..............0.02"–0.035"
power supply requirement ......... 230V, 20 Amps
Welding power........................................ 4.2 KVA
shipping Weight ........................................69 lbs.
figure 1. Blade Welder.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
-2- t10499/t10500 Blade Welder Identification To reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations. figure 2. identification. Blade shear grinder switch Carrying handle (1 of 2) Clamping Jaws Welding Button Main on/oFF s...
t10499/t10500 Blade Welder -3- Safety for Blade Welders WELDINg fUMES. Breathing welding fumes can cause respiratory damage. Maintain adequate ven-tilation during and after welding operations. PREvENT fIRES. Welding work zones must be kept clear of flammable liquids or gases, such as gasoline or sol...
-4- t10499/t10500 Blade Welder Electrocution, fire, or equipment damage may occur if machine is not correctly grounded and connected to the power supply. full-Load Current Rating The full-load current rating is the amperage a machine draws at 100% of the rated output power. On machines with multiple...
