Grizzly Industrial G6048 - Manuals

Page 2 - NOTICE; Safety Instructions For Pneumatic Power Tools; SAFETY

For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, ifnot avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, ifnot avoided, COULD result in death or serious injury. Indicates a...

Page 3 - Safety Instructions For Pneumatic Tools

G6048 15/16 Gauge Nailer -2 - 10. USE PROPER AIR HOSE for the tool. Make sure your air hose is ingood condition and is long enough toreach your work without stretching. 11. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neck-ties, rings, bracelets, or other jewel-ry which may get caught in...

Page 4 - Basic Nailer Safety

-3 - Operating this nailer can propelobjects into the air, causing immedi-ate eye damage. To protect yourself,always wear American NationalStandards Institute (ANSI) approvedsafety glasses or goggles when oper-ating this equipment. In addition, thisnailer discharges at 85-90 decibels.To protect your...

Page 5 - INTRODUCTION; Commentary

G6048 15/16 Gauge Nailer -4 - INTRODUCTION Commentary Most importantly, we stand behind ourtools. If you have any service questions orparts requests, please call or write us atthe location listed below. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663 Fax: (80...

Page 7 - OPERATION; Loading Nailer; Single/Bump Fire Mode

G6048 15/16 Gauge Nailer -6 - OPERATION Loading Nailer To load your nailer: 1. Disconnect the air supply from thenailer! 2. Flip the magazine latch in the direc-tion shown in Figure 1 . 3. Pull back the magazine cover until itstops. 4. Point the nailer down and insert astick of nails into the magazi...

Page 8 - Operating Nailer

G6048 15/16 Gauge Nailer -7 - Operating Nailer Besides damaging your workpiece,deflection can cause injury if your freehand is securing the workpiece in thelocation that the nail deflects. 4. Press the trigger. If the nail drove intothe wood far enough, continue withyour intended operations. If the ...

Page 9 - Clearing Jammed Nails

G6048 15/16 Gauge Nailer -8 - Always disconnect air from nailerwhenever clearing a jammed nail! Clearing Jammed Nails The most frequent situation with any typeof nailer is a nail jam. A jammed nail mustbe cleared before using the nailer again.The two places where a nail can getjammed are the magazin...

Page 14 - TROUBLESHOOTING; PROBLEM

TROUBLESHOOTING Air leaking at trigger valvearea. Air leaking between hous-ing and hose. Air leaking between hous-ing and cap assembly. Tool skips nails while dis-charging. Tool runs slowly or has aloss of power. Fasteners frequently jamthe nailer. Nailer does not fire. 1. O-rings must be replaced &...

Page 15 - WARRANTY AND RETURNS

G6048 15/16 Gauge Nailer -14 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directlyor indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lac...

Page 16 - WARRANTY CARD

Name __________________________________________________________ Street __________________________________________________________ City ____________________ State ________ Zip _________ Phone Number ____________ E-Mail ___________________ FAX ____________ Model # _______________Serial#_______________...

Page 17 - Send a Grizzly Catalog to a friend:; Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT NAIL Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here