Grizzly Industrial G8691 - Manual

-5- G8691 Wood Lathe w/ Stand 110V Operation SECTION 2: CIRCUIT REQUIREMENTS A 15-amp fuse or circuit breaker should be usedwhen fusing this wood lathe. Circuit breakersrated any higher are not adequate to protect thecircuit from power surges. Grounding This equipment must be grounded. Verifythat an...

-6- G8691 Wood Lathe w/ Stand SECTION 3: INTRODUCTION We are proud to offer the Grizzly Model G8691Wood Lathe w/ Stand. The Model G8691 is part ofa growing Grizzly family of fine woodworkingmachinery. When used according to the guide-lines set forth in this manual, you can expectyears of trouble-fre...

-7- G8691 Wood Lathe w/ Stand Unpacking This wood lathe is shipped from the manufacturerin a carefully packed carton. If you discover themachine is damaged after you’ve signed for deliv-ery, and the truck and driver are gone, you willneed to file a freight claim with the carrier. Savethe containers ...

-9- G8691 Wood Lathe w/ Stand SECTION 4: ASSEMBLY Beginning Assembly Most of your Model G8691 Wood Lathe has beenassembled at the factory, but some parts must beassembled or installed after delivery. We haveorganized the assembly process into steps.Please follow along in the order presented here. TO...

-11- G8691 Wood Lathe w/ Stand SECTION 5: OPERATIONS Once assembly is complete and adjustments aremade to your satisfaction, you are ready to testrun the machine. Turn on the power supply at the main panel.Press the START button. Make sure that your fin-ger is poised on the STOP button, just in case...

-13- G8691 Wood Lathe w/ Stand SECTION 6: MAINTENANCE Lubrication V-Belt Since all bearings are shielded and permanentlylubricated, simply leave them alone until theyneed to be replaced. Do not lubricate them. Inspect regularly for tension and wear. Check pul-leys to ensure that they are properly al...

-15- G8691 Wood Lathe w/ Stand Design Type ......................................................................................................Floor Model Overall Dimensions: Including Stand ........................................................................42" H x 17" W x 54 1 ⁄ 4 &#...

-18- G8691 Wood Lathe w/ Stand Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse,negligence, accidents, repairs or alterations or lac...

-19- G8691 Wood Lathe w/ Stand 10. Which benchtop tools do you own? Check all that apply. ___1" x 42" Belt Sander ___6" - 8" Grinder ___5" - 8" Drill Press ___Mini Lathe ___8" Table Saw ___10" - 12" Thickness Planer ___8" - 10" Bandsaw ___Scroll Saw ___Dis...