Grizzly Industrial H6144 - Manual

H6144 34° Angle Finish Nailer–2½" -6 - SET UP Figure 1. Model H6144 inventory. B C D G Unpacking Your Model H6144 left our warehouse in a carefully packed box. If you discover the nailer is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for...

H6144 34° Angle Finish Nailer–2½" -8 - Safety Yoke A safety yoke mechanism on the nose of the nailer acts as a secondary safety device. When the trigger is pressed, the nailer will not fire until the safety yoke mechanism is depressed. Before you use your nailer for the first time, check the saf...

H6144 34° Angle Finish Nailer–2½" -9 - OPERATIONS Loading When replacing nails in your Model H6144, follow these guidelines: Gauge: 15Length: 1 1 ⁄ 4 " -2 1 ⁄ 2 " Capacity: 40Angle: 34° NOTICE: A number of manufacturers' nails may fit the Model H6144. However, for best performance, we re...

H6144 34° Angle Finish Nailer–2½" -10 - Figure 5. Depth adjustment knob. Besides damaging your workpiece, deflection can cause injury if your free hand is securing the workpiece in the location that the nail deflects. 5. Pull the trigger. If the nail drove into the wood far enough, continue with...

H6144 34° Angle Finish Nailer–2½" -11 - The most frequent situation with any type of nailer is a nail jam. A jammed nail must be cleared before using the nailer again. To clear a jammed nail from the dis-charge area on the Model H6144: 1. DISCONNECT NAILER FROM THE AIR SUPPLY! Figure 7. Releasin...

H6144 34° Angle Finish Nailer–2½" -13 - CLEANING & LUBRICATION Cleaning Use a good solvent to clean the nose assembly of the nailer. Always be sure that the nailer is dry before using it again. Do not allow dust, chips, sand, etc. into the air connectors or into the body of the nailer; this ...

H6144 34° Angle Finish Nailer–2½" -16 - 1. O-rings must be replaced & operation of safety yoke must be checked. 1. Tighten screws.2. Replace O-ring.3. Tighten air fitting & use teflon tape. 1. Replace damaged seals. 1. Tighten screws and fit- tings. 2. Clean nose.3. Clean magazine and in...

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Griz...

Name _________________________________________________________________________Street ________________________________________________________________________City____________________State________Zip_________Phone Number____________E-Mail___________________FAX ____________Model # H6144 34°Angle Finish...

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here